Project Gutenberg's Encyclopedia of Needlework, by Thérèse de Dillmont
This eBook is for the use of anyone anywhere at no cost and with
almost no restrictions whatsoever. You may copy it, give it away or
re-use it under the terms of the Project Gutenberg License included
with this eBook or online at www.gutenberg.org
Title: Encyclopedia of Needlework
Author: Thérèse de Dillmont
Release Date: March 8, 2007 [EBook #20776]
Language: English
Character set encoding: ISO-8859-1
*** START OF THIS PROJECT GUTENBERG EBOOK ENCYCLOPEDIA OF NEEDLEWORK ***
Produced by Susan Skinner, Julie Barkley and the Online
Distributed Proofreading Team at http://www.pgdp.net. This
file is gratefully uploaded to the PG collection in honor
of Distributed Proofreaders having posted over 10,000
ebooks.
ENCYCLOPEDIA
OF
NEEDLEWORK
BY
THÉRÈSE DE DILLMONT
[Illustration]
_ENGLISH EDITION_
* * * * *
ALL RIGHTS RESERVED
_To be had:_
_of TH. DE DILLMONT, DORNACH, Alsace, and at all booksellers, and
embroidery shops._
* * * * *
Price, English bound with gilt edges:
English edition Sh. 3.--
French edition Fr. 5.75
German edition Mk. 3.--
Preface.
The absolute want of any comprehensive book on needlework--such an one
as contains both verbal and pictorial descriptions of everything
included under the name of needlework--has led me to put into the
serviceable form of an Encyclopedia, all the knowledge and experience,
which years of unceasing study and practice have enabled me to
accumulate on the subject, with the hope that diligent female workers of
all ages, may be able, by its means to instruct themselves in every
branch of plain and fancy needlework.
All the patterns given, even the most insignificant, were worked afresh
for the purpose, and thus, not merely faithful representations, but also
lucid and intelligible explanations of the same, are secured.
In order that my readers may have something besides the dull theory, the
work is enlivened by a number of useful patterns, some new, some derived
from the artistic productions of such countries and epochs as have
become famous by special excellence in the domain of needlework.
Though, at first sight, the reproduction of many of these patterns may
seem to present insuperable difficulties, they will, after a careful
study of the text, and exact attention to the directions given, prove
easy to carry out.
Many of these interesting designs are drawn from private collections,
whose owners, with great kindness, placed their treasures at my
disposal, to copy and borrow from at discretion, for which I desire to
take the present opportunity, of tendering them my warmest thanks.
The choice of colours and material--a difficult matter to many--my
readers will find rendered comparatively easy to them by the notes
affixed to the illustrations; and I may point out, that most of the
patterns were worked with D.M.C cottons, which enjoy the well-earned
reputation of being, the very best of their kind, in the market of the
world.
Experience has convinced me that, in many instances, these cottons may
with advantage take the place of wool, linen thread, and even silk.
If this work meet with indulgent judges, and prove really useful, I
shall find ample reward in that fact for the trouble and difficulties
that have unavoidably attended its completion.
[Illustration: STRIPE SHOWING RUNNING, STITCHING, BUTTON-HOLING, AND
HERRING-BONING.]
Plain Sewing.
Many, on opening the Encyclopedia of needlework will be disposed to
exclaim as they read the heading of this first section: What is the use
of describing all the old well-known stitches, when machines have so
nearly superseded the slower process of hand-sewing? To this our reply
is that, of all kinds of needlework, Plain Sewing needs to be most
thoroughly learned, as being the foundation of all. Those who are able
to employ others to work for them, should at least know how to
distinguish good work from bad, and those who are in less fortunate
circumstances, have to be taught how to work for themselves.
POSITION OF THE BODY AND HANDS.--Before describing different kinds of
stitches, a word should be said as to the position of the body and hands
when at work. Long experience has convinced me that no kind of
needlework necessitates a stooping or cramped attitude. To obviate
which, see that your chair and table suit each other in height, and that
you so hold your work as hardly to need to bend your head at all. The
practice of fastening the work to the knee, besides being ungraceful, is
injurious to the health.
NEEDLES.--These should be of the best quality. To test a needle, try
to break it; if it resist, and then break clean in two, the steel is
good; if it bend without breaking, or break without any resistance, it
is bad. Never use a bent needle, it makes ugly and irregular stitches,
and see that the eye, whether round or egg-shaped, be well-drilled, that
it may not fray or cut the thread. Long or half-long needles are the
best for white work, long ones for dress-making, and longer ones still,
with long eyes, for darning. A stock of each, from No 5 to 12, is
advised. The needle should always be a little thicker than the thread,
to make an easy passage for it through the stuff.
To keep needles from rusting, strew a little stone alum in the packets,
and workers whose hands are apt to get damp, should have a small box of
it handy, to powder their fingers with. Blackened needles can be made
quite bright again by drawing them through an emery cushion.
SCISSORS.--Scissors are a very important accessory of the work-table,
and two varieties are indispensable; a pair of large ones for
cutting-out, with one point blunt and the other sharp, the latter to be
always held downwards; and a pair of smaller ones with two sharp points.
The handles should be large and round; if at all tight, they tire and
disfigure the hand.
THIMBLE.--Steel thimbles are the best; bone are very liable to break,
and silver ones are not deeply enough pitted, to hold the needle. A
thimble should be light, with a rounded top and flat rim.
THE THREAD.--Except for tacking, your thread should never be more than
from 40 to 50 c/m. long.[1] If the thread is in skeins, it does not
matter which end you begin with, but if you use reeled cotton, thread
your needle with the end that points to the reel, when you cut it; as
the other end will split, and unravel, when twisted from left to right,
which is generally done, to facilitate the process of threading. The
cotton should always be cut, as it is weakened by breaking.
KNOTTING THE THREAD INTO THE NEEDLE (fig. 1).--When the thread becomes
inconveniently short, and you do not want take a fresh one, it may be
knotted into the needle, thus: bring it round the forefinger close to
the needle, cross it on the inside next to the finger, hold the crossed
threads fast, with the thumb draw the needle out through the loop thus
formed, and tighten the loop round both ends.
[Illustration: FIG. 1. KNOTTING THE THREAD INTO THE NEEDLE.]
MATERIALS.--For tacking, use Coton à coudre D.M.C qualité supérieure
(black and gold stamp) Nos. 2 to 6.[A] For hand-sewing, Fil d'Alsace
D.M.C Nos. 30 to 700,[A] and Fil à dentelle D.M.C, balls or reels, Nos.
25 to 100[A] will be found most useful. For machine-work: Câblé 6 fils
pour machines D.M.C, Nos. 30 to 300,[A] black and white, or white and
blue stamp. These can also be used for hand-work. Both these and the
lace-thread (Fil à dentelle) on reels, are superfine in quality. The
medium sizes are the most useful; but the only suitable ones for very
fine and delicate fabrics are the Fil à dentelle D.M.C, and Fil
d'Alsace, and the latter only is manufactured in the higher numbers.
All these threads are to be had, wound in balls, or on reels, the buyer
may make his own choice; balls are apt to get tangled, but the cotton
preserves its roundness better than when it is wound on reels. Linen is
generally sewn with linen-thread, but Fil à dentelle and the Fil
d'Alsace are very good substitutes.
POSITION OF THE HANDS (fig. 2).--The stuff, fastened to a cushion,
must be held with the left hand, which should neither rest on the table,
nor on the cushion, the needle must be held between the thumb and
forefinger, of the right hand, and the middle finger, armed with the
thimble, pushes the needle far enough through the stuff, for the other
fingers to take hold of it and draw it out; the thread then comes to lie
between the fourth and fifth fingers in the form of a loop, which must
be tightened gradually to avoid its knotting.
[Illustration: FIG. 2. POSITION OF THE HANDS.]
POSITION OF THE HANDS WITHOUT CUSHION (fig. 3).--When the work cannot
be fastened to a cushion it should be held between the forefinger and
the thumb, and left hanging down, over the other fingers. If it need to
be more firmly held, draw it between the fourth and fifth fingers, which
will prevent it from getting puckered or dragged.
[Illustration: FIG. 3. POSITION OF THE HANDS WITHOUT CUSHION.]
STITCHES.--Plain-Sewing comprises 4 varieties of stitches, (1)
running, (2) back-stitching, (3) hemming and (4) top or over-sewing.
(1) RUNNING-STITCH (fig. 4).--This is the simplest and easiest of all.
Pass the needle in and out of the material, at regular intervals, in a
horizontal direction, taking up three or four threads at a time. If the
stuff allow, several stitches may be taken on the needle at once, before
the thread is drawn out. Running-stitch is used for plain seams, for
joining light materials, for making gathers and for hems.
[Illustration: FIG. 4. RUNNING-STITCH.]
(2) BACK-STITCH (fig. 5).--Insert the needle, and draw it out six
threads further on, carry your thread back, from left to right, and
insert the needle three threads back from the point at which it was last
drawn out, and bring it out six threads beyond. Stitching and
back-stitching are better and more quickly done by machine than by hand.
[Illustration: FIG. 5. BACK-STITCH.]
STITCHING (fig. 6).--The production of a row of back-stitches, that
exactly meet one another, constitutes what is called stitching. Only one
stitch can be made at a time, and the needle must be put in, exactly at
the point where it was drawn out to form the preceding back-stitch, and
brought out as many threads further on as were covered by the last
back-stitch. The beauty of stitching depends on the uniform length of
the stitches, and the straightness of the line formed, to ensure which
it is necessary to count the threads for each stitch, and to draw a
thread to mark the line. If you have to stitch in a slanting line across
the stuff, or the stuff be such as to render the drawing of a thread
impossible, a coloured tacking thread should be run in first, to as a
guide.
[Illustration: FIG. 6. STITCHING.]
STITCHED HEM (fig. 7).--Make a double turning, as for a hem, draw a
thread two or three threads above the edge of the first turning, and do
your stitching through all three layers of stuff; the right side will be
that on which you form your stitches.
[Illustration: FIG. 7. STITCHED HEM.]
(3) HEMMING-STITCH (fig. 8).--To make a good hem, your stuff must be
cut in the line of the thread. Highly dressed stuffs, such as linen and
calico; should be rubbed in the hand, to soften them, before the hem is
laid. Your first turning should not be more than 2 m/m. wide; turn down
the whole length of your hem, and then make the second turning of the
same width, so that the raw edge is enclosed between two layers of
stuff.
[Illustration: FIG. 8. HEMMING-STITCH.]
Narrow hems do not need to be tacked, but wide ones, where the first
turning should only be just wide enough to prevent the edge from
fraying, ought always to be. In hemming you insert the needle and
thread directed in a slanting position towards you, just below the edge
of the hem, and push it out two threads above, and so on to the end,
setting the stitches, two or three threads apart, in a continuous
straight line. To ensure the hem being straight, a thread may be drawn
to mark the line for the second turning, but it is not a good plan,
especially in shirt-making, as the edge of the stuff, too apt in any
case, to cut and fray, is, thereby, still further weakened. Hems in
woollen materials, which will not take a bend, can only be laid and
tacked, bit by bit. In making, what are called rolled hems, the needle
must be slipped in, so as only to pierce the first turning, in order
that the stitches may not be visible on the outside.
FLAT SEAM (fig. 9).--Lay your two edges, whether straight or slanting,
exactly even, tack them together with stitches 2 c/m. long, distant 1 to
2 c/m. from the edge, and then back-stitch them by machine or by hand,
following the tacking-thread. Cut off half the inner edge, turn the
outer one in, as for a hem and sew it down with hemming-stitches.
[Illustration: FIG. 9. FLAT SEAM.]
Smooth the seam underneath with the forefinger as you go, to make it lie
quite flat. Beginners should flatten down the seam with their thimbles,
or with the handle of the scissors, before they begin to hem, as the
outer and wider edge is very apt to get pushed up and bulge over, in the
sewing, which hides the stitches.
ROUNDED SEAM.--Back-stitch your two edges together, as above directed,
then cut off the inner edge to a width of four threads, and roll the
outer one in, with the left thumb, till the raw edge is quite hidden,
hemming as you roll. This kind of seam, on the wrong side, looks like a
fine cord, laid on, and is used in making the finer qualities of
underclothing.
FASTENING THREADS OFF, AND ON (fig. 10).--Knots should be avoided in
white work. To fasten on, in hemming, turn the needle backwards with the
point up, take one stitch, and stroke and work the end of the thread in,
underneath the turning. To fasten on, in back-stitching or running,
make one stitch with the new thread, then take both ends and lay them
down together to the left, and work over them, so that they wind in, and
out of the next few stitches.
[Illustration: FIG. 10. FASTENING THREADS OFF AND ON.]
(4) TOP OR OVER-SEWING STITCH (fig. 11).--This stitch is used for
joining selvedges together. To keep the two pieces even, it is better,
either to tack or pin them together first. Insert the needle, from right
to left, under the first thread of the selvedge, and through both edges,
and sew from right to left, setting your stitches not more than three
threads apart. The thread must not be drawn too tightly, so that when
the seam is finished and flattened with the thimble, the selvedges may
lie, side by side.
[Illustration: FIG. 11. TOP OR OVER-SEWING STITCH.]
ANOTHER KIND OF SEWING-STITCH (fig. 12)--For dress-seams and patching;
sew left to right, tacking or pinning the edges together first, and
holding them tightly with the thumb and finger, to keep perfectly even.
[Illustration: FIG 12. ANOTHER KIND OF SEWING-STITCH.]
ANTIQUE OR OLD-GERMAN SEAM (figs. 13 and 14).--Tack or pin the
selvedges together as above, then, pointing your needle upwards from
below, insert it, two threads from the selvedge, first on the wrong
side, then on the right, first through one selvedge, then through the
other, setting the stitches two threads apart. In this manner, the
thread crosses itself, between the two selvedges, and a perfectly flat
seam is produced. Seams of this kind occur in old embroidered linen
articles, where the stuff was too narrow to allow for any other. A
similar stitch, fig. 14, only slanting, instead of quite straight, as in
fig. 13, is used in making sheets.
[Illustration: FIG. 13. ANTIQUE OR OLD-GERMAN SEAM.]
[Illustration: FIG. 14. ANTIQUE OR OLD GERMAN SEAM.]
FRENCH DOUBLE SEAM (fig. 15).--For joining such stuffs as fray, use
the so-called French-seam.
[Illustration: FIG 15. FRENCH DOUBLE-SEAM.]
Run your two pieces of stuff together, the wrong sides touching, and the
edges perfectly even, then turn them round just at the seam, so that the
right sides come together inside, and the two raw edges are enclosed
between, and run them together again. See that no threads are visible on
the outside. This seam is used chiefly in dress-making, for joining
slight materials together which cannot be kept from fraying by any other
means.
HEMMED DOUBLE SEAM (figs. 16 and 17).--Turn in the two raw edges, and
lay them one upon the other, so that the one next the forefinger, lies
slightly higher than the one next the thumb. Insert the needle, not
upwards from below but first into the upper edge, and then, slightly
slanting, into the lower one. This seam is used in dress-making, for
fastening down linings. Fig. 17 shows another kind of double seam, where
the two edges are laid together, turned in twice, and hemmed in the
ordinary manner, with the sole difference, that the needle has to pass
through a sixfold layer of stuff.
[Illustration: FIG. 16. HEMMED DOUBLE-SEAM.]
[Illustration: FIG. 17. OPEN HEMMED DOUBLE-SEAM.]
GATHERING (fig. 18).--Gathers are made with running-stitches of
perfectly equal length; take up and leave three or four threads,
alternately, and instead of holding the stuff fast with your thumb, push
it on to the needle as you go, and draw up your thread after every four
or five stitches.
[Illustration: FIG. 18. GATHERING.]
STROKING GATHERS (fig. 19).--When you have run in your gathering
thread, draw it up tight, and make it fast round the finger of your left
hand, and then stroke down the gathers with a strong needle, so that
they lie evenly side by side, pushing each gather, in stroking it, under
your left thumb, whilst you support the stuff at the back with your
other fingers.
[Illustration: FIG. 19. STROKING GATHERS.]
RUNNING IN A SECOND GATHERING THREAD (fig. 20).--This is to fix the
gathers after they have been stroked, and should be run in 1 or 2 c/m.
below the first thread, according to the kind of stuff, and the purpose
it is intended for: take up five or six gathers at a time, and draw your
two threads perfectly even, that the gathers may be straight to the line
of the thread.
[Illustration: FIG. 20. RUNNING IN A SECOND GATHERING-THREAD.]
SEWING ON GATHERS (fig. 21).--To distribute the fulness equally,
divide the gathered portion of material, and the band, or plain piece,
on to which it is to be sewn, into equal parts, and pin the two together
at corresponding distances, the gathered portion under the plain, and
hem each gather to the band or plain piece, sloping the needle to make
the thread slant, and slipping it through the upper threads only of the
gathers.
[Illustration: FIG. 21. SEWING ON GATHERS.]
WHIPPING (fig. 22).--Whipping is another form of gathering, used for
fine materials. With the thumb and forefinger of the left hand, roll the
edge over towards you, into a very tight thin roll, insert the needle on
the inside of the roll next the thumb, and bring it out on the outside
next the forefinger, at very regular distances, and draw up the thread
slightly, from time to time, to form the gathers.
[Illustration: FIG 22. WHIPPING.]
ORNAMENTAL HEM (fig. 23). For an ornamental hem, make a turning, 2 or
3 c/m. deep, and run in a thread, with small running-stitches up and
down, as shown in fig. 23. By slightly drawing the thread, the straight
edge will be made to look as if it were scalloped.
[Illustration: FIG. 23. ORNAMENTAL HEM.]
SEWING ON CORD (fig. 24).--For sewing on cord, use strong thread,
either Fil d'Alsace D.M.C, Fil à dentelle D.M.C or Câblé 6 fils D.M.C
No. 25, 30, 35 or 40.[A] Be careful not to stretch the cord, but to hold
it in, as you sew it, as it invariably shrinks more than the stuff in
the first washing. Fasten it with hemming stitches to the edge of the
turning, taking care that it does not get twisted.
[Illustration: FIG. 24. SEWING ON CORD.]
SEWING ON FLAPS (fig. 25).--These should be back-stitched on to the
right side of the article they are to be affixed to, quite close to the
edge, then folded over in half, and hemmed down on the wrong side. Like
the cord, the flap must, in the process, be held in very firmly with the
left hand. Though the back-stitching could be more quickly done by
machine, hand-work is here preferable, as the holding in cannot be done
by machine.
[Illustration: FIG. 25. SEWING ON FLAPS.]
SEWING ON TAPE-LOOPS (figs. 26 and 27).--These, in the case of the
coarser articles of household linen, are generally fastened to the
corners. Lay the ends of your piece of tape, which should be from 15 to
17 c/m. long, side by side, turn in and hem them down, on three sides:
the loop should be so folded as to form a three-cornered point, shewn in
the illustration. Join the two edges of the tape together in the middle
with a few cross-stitches, and stitch the edge of the hem of the article
to the loop, on the right side.
[Illustration: FIG. 26. SEWING ON TAPE-LOOPS TO THE CORNER.]
[Illustration: FIG. 27. SEWING ON TAPE-LOOPS IN THE MIDDLE OF THE
ARTICLE.]
Fig. 27 shows how to sew on a loop in the middle of an article, the two
ends separately, one on one side, the other on the other.
STRINGS AND LOOPS FOR FINE UNDER-LINEN (fig. 28).--Sew these on,
likewise, on the wrong side of the article, hemming down the ends, and
fastening them on the right side, with two rows of stitching crossing
each other, and a third row along the edge.
[Illustration: FIG. 28. STRINGS AND LOOPS ON FINE UNDER-LINEN.]
BUTTON-HOLES IN LINEN (fig. 29).--Cut your hole perfectly straight,
and of exactly, the diameter of the button, having previously marked
out the place for it, with two rows of running-stitches, two or three
threads apart. Put in your needle at the back of the slit, and take up
about three threads, bring the working thread round, from right to left
under the point of the needle, and draw the needle out through the loop,
so that the little knot comes at the edge of the slit, and so on to the
end, working from the lower left-hand corner to the right. Then make a
bar of button-hole stitching across each end, the knotted edge towards
the slit.
[Illustration: FIG. 29. BUTTON-HOLES IN LINEN.]
BUTTON HOLES IN DRESS MATERIALS (fig. 30).--Mark out and cut them as
above described; if however, the material be liable to fray, wet the
slit as soon as you have cut it, with liquid gum, and lay a strand of
strong thread along the edge to make your stitches over; one end of
dress button-holes must be round, the stitches diverging like rays from
the centre, and when you have worked the second side, thread the needle
with the loose strand, and pull it slightly, to straighten the edges;
then fasten off, and close the button-hole with a straight bar of
stitches across the other end, as in fig. 29.
[Illustration: FIG. 30. BUTTON-HOLES IN DRESS-MATERIALS.]
SEWING ON BUTTONS (figs. 31 and 32).--To sew linen, or webbed buttons
on to underclothing, fasten in your thread with a stitch or two, at the
place where the button is to be; bring the needle out through the middle
of the button, and make eight stitches, diverging from the centre like a
star, and if you like, encircle them by a row of stitching, as in fig.
32. This done, bring the needle out between the stuff and the button,
and twist the cotton six or seven times round it, then push the needle
through to the wrong side, and fasten off.
[Illustration: FIG. 31. SEWING ON LINEN BUTTONS.]
[Illustration: FIG. 32. SEWING ON WEBBED BUTTONS.]
BINDING SLITS (figs. 33, 34, 35, 36).--Nothing is more apt to tear
than a slit whether it be hemmed or merely bound. To prevent this, make
a semicircle of button-hole stitches at the bottom of the slit, and
above that, to connect the two sides, a bridge of several threads,
covered with button-hole stitches.
[Illustration: FIG. 33. BINDING SLITS WITH HEM.]
[Illustration: FIG. 34. BINDING SLITS WITH PIECE ON CROSS.]
[Illustration: FIG. 35. BINDING SLITS WITH BROAD BAND.]
[Illustration: FIG. 36. STRENGTHENING SLITS WITH GUSSET.]
In fig. 33, we show a hemmed slit, and in figs. 34 and 35, are two slits
backed the one with a narrow, the other, with a broad piece of the
material, cut on the cross.
In under-linen, it often so happens that two selvedges meet at the slit,
which renders binding unnecessary; in that case take a small square of
stuff, turn in the raw edges, top-sew it into the slit on two sides,
turn in the other two, fold over on the bias, and hem them down over the
top-sewing, as shewn in fig. 36. Such little squares of material,
inserted into a slit or seam, to prevent its tearing, are called
gussets.
SEWING ON PIPING (fig. 37). Piping is a border, consisting of a cord or
bobbin, folded into a stripe of material, cut on the cross, and affixed
to the edge of an article to give it more strength and finish. It is a
good substitute for a hem or binding on a bias edge, which by means of
the cord, can be held in, and prevented from stretching. Cut your
stripes diagonally, across the web of the stuff, and very even; run them
together, lay the cord or bobbin along the stripe, on the wrong side, 5
m/m. from the edge, fold the edge over, and tack the cord lightly in.
Then lay it on the raw edge of the article, with the cord towards you,
and with all the raw edges turned away from you. Back-stitch the piping
to the edge, keeping close to the cord. Then turn the article round,
fold in the raw outside edge over the others, and hem it down like an
ordinary hem.
[Illustration: FIG. 37. SEWING ON PIPING.]
FIXING WHALE-BONES (fig. 38).--Before slipping the whale-bone into its
case or fold of stuff, pierce holes in it, top and bottom, with a red
hot stiletto. Through these holes, make your stitches, diverging like
rays or crossing each other as shown in fig. 38.
[Illustration: FIG 38. FIXING WHALE-BONES.]
HERRING-BONING (fig. 39).--This stitch is chiefly used for seams in
flannel, and for overcasting dress-seams, and takes the place of
hemming, for fastening down the raw edges of a seam that has been run or
stitched, without turning them in. Herring-boning is done from left to
right, and forms two rows of stitches. Insert the needle from right to
left, and make a stitch first above, and then below the edge, the
threads crossing each other diagonally, as shewn in fig. 39.
[Illustration: FIG. 39. HERRING-BONING]
FOOTNOTES:
[1] Our readers should be provided with a French metre, with the English
yard marked on the back for purposes of comparison.
[A] See at the end of the concluding chapter, the table of numbers and
sizes and the list of colours of the D.M.C threads and cottons.
[Illustration: SPECIMENS OF PATTERN DARNS.]
Mending.
The mending of wearing-apparel and house-linen, though often an
ungrateful task, is yet a very necessary one, to which every female hand
ought to be carefully trained. How best to disguise and repair the wear
and tear of use or accident is quite as valuable an art, as that of
making new things.
Under the head of mending, we include the strengthening and replacing of
the worn and broken threads of a fabric, and fitting in of new stuff in
the place of that which is torn or damaged. The former is called
darning, the latter, patching.
DARNING.--When only a few of the warp or woof threads are torn or
missing, a darn will repair the mischief, provided the surrounding parts
be sound. When the damage is more extensive, the piece must be cut out.
In some cases the warp of the stuff itself can be used for darning,
otherwise thread as much like the stuff as possible should be chosen.
MATERIALS SUITABLE FOR MENDING.--Coton à repriser D.M.C is used for
most kinds of darning. It can be had in 18 different sizes, from Nos. 8
to 100, white and unbleached, and in all the colours of the D.M.C
colour-card in Nos. 12, 25 and 50.
It is but very slightly twisted and can be split or used double, if
necessary, according to the material. For all the coarser articles of
house-linen, unbleached cotton is the best, and for the finer white
fabrics, Coton surfin D.M.C Nos. 110, 120 and 150[A]. This cotton, which
is not the least twisted, and is to be had both white and unbleached,
can be used, by subdividing it, for darning the finest cambric.
VARIETIES OF DARNING.--These are four, (1) Linen darning, (2) Damask
darning, (3) Satin or Twill darning, and (4) Invisible darning, called
also, Fine-drawing.
(1) LINEN DARNING (figs. 40 and 41).--All darns should be made on the
wrong side of the stuff, excepting fig. 54, which it is sometimes better
to make on the right side. The longitudinal running, to form the warp,
must be made first. The thread must not be drawn tightly in running your
stitches backwards and forwards, and be careful to leave loops at each
turning, to allow for the shrinking of the thread in the washing,
without its pulling the darn together.
[Illustration: FIG. 40. LINEN DARNING. DRAWING IN THE WARP THREADS.]
[Illustration: FIG. 41. LINEN DARNING. DRAWING IN THE WOOF THREADS.]
Run your needle in, about one c/m. above the damaged part, take up one
or two threads of the stuff and miss the same number, working straight
to a thread; on reaching the hole, carry your cotton straight across it,
take up alternate threads beyond, and proceed as before. Continue the
rows backwards and forwards, taking up in each row, the threads left in
the preceding one. Turn the work round and do the same for the woof;
alternately taking up and leaving the warp threads, where the cotton
crosses the hole. The threads must lie so alone both ways, that the
darn, when completed, replaces the original web. The threads are only
drawn so far apart in the illustrations, for the sake of clearness.
When the material to be darned does not admit of a fleecy thread, such
as Coton à repriser D.M.C, one that as nearly as possible matches the
material, should be chosen from the D.M.C cottons.[A]
DIAGONAL LINEN DARNING (fig. 42).--Darns are sometimes begun from the
corner, so as to form a diagonal web, but they are then much more
visible than when they are worked straight to a thread, and therefore
not advisable.
[Illustration: FIG. 42. DIAGONAL LINEN DARNING.]
(2) SATIN OR TWILL DARNING (fig. 43).--By twill darning, the damaged
web of any twilled or diagonal material can be restored. It would be
impossible to enumerate all the varieties of twilled stuffs, but the
illustrations and accompanying directions will enable the worker to
imitate them all.
[Illustration: FIG. 43. SATIN OR TWILL DARNING.]
Begin, as in ordinary darning by running in the warp threads, then take
up one thread, and miss three. In every succeeding row, advance one
thread in the same direction. Or, miss one thread of the stuff and take
up two, and as before, advance, one thread in the same direction, every
succeeding row. The order in which threads should be missed and taken
up, must depend on the web which the darn is intended to imitate.
When the original is a coloured stuff, it is advisable to make a
specimen darn first, on a larger scale, so that you may be more sure of
obtaining a correct copy of the original web.
(3) DAMASK DARNING (figs. 44, 45, 46, 47, 48, 49).--A damask darn is
begun in the same way as all other darns are; the pattern is formed by
the cross-runnings and will vary with the number of warp threads taken
up and missed, in each successive running. The woven design which you
are to copy with your needle must therefore be carefully examined first.
Figs. 44 and 45 show the wrong and right sides of a damask darn, in
process of being made.
[Illustration: FIG. 44. DAMASK DARNING. WRONG SIDE.]
[Illustration: FIG. 45. DAMASK DARNING. RIGHT SIDE.]
Fig. 46 represents a completed one. In the case of coloured webs, a
light shade of cotton is generally used for the warp, one that matches
the stuff, for the shot or woof.
[Illustration: FIG. 46. DAMASK DARNING. COVERED GROUND.]
Figs. 47 and 48, illustrate two specimens of darning, formerly done in
the convents, from which it will be seen, that the warp and the woof
were first drawn in with rather fine thread and the pattern then worked
into this foundation with coarser, or else, coloured thread. When this
kind of darn is in two colours, take, for the darker shade, Coton à
broder D.M.C, or Coton à repriser D.M.C, which are both of them to be
had in all the bright and faded shades, to match alike both old and new
linen.
[Illustration: FIG. 47. DAMASK DARNING ON NEEDLE-MADE GROUND.]
[Illustration: FIG. 48. DAMASK DARNING ON NEEDLE-MADE GROUND.]
Fig. 49, which is executed in two colours, and is likewise copied from
an old work on darning, shows you the manner in which a dice-pattern is
to be reproduced.
[Illustration: FIG. 49. DAMASK DARNING WITH COLOURED THREAD.]
(4) DARNING, LOST IN THE GROUND (fig. 50).--A kind of darn used for
repairing rents, the edges of which fit exactly into one another.
Neither the torn threads of the material nor the rough edges must be cut
off; the torn part is to be tacked upon a piece of oil-cloth, wrong side
uppermost, and the edges, drawn together by a thread, run in backwards,
and forwards, across them. The stitches must be set as closely together
as possible, and regularly inverted, as in every other darn. A much
finer thread relatively than that of which the material is composed
should, in all cases be used for darning. In this instance also, for the
sake of greater distinctness, the size of the thread has been magnified
in the illustration. Coton surfin D.M.C, will be found the best for
darning both calico and linen.
[Illustration: FIG. 50. DARNING LOST IN THE GROUND.]
FINE DRAWING (fig. 51).--The art of making invisible darns in cloth,
though such a useful one, is all but unknown. It is a tedious process
and one which, though easy enough to understand, requires great care in
the execution.
[Illustration: FIG. 51. FINE DRAWING.]
Use as fine a needle as possible and thread it with hair, instead of
silk, or any other kind of fibre. Red and white hair is the strongest,
and stronger than the ravellings of the stuff. Of course the hair has
first to be carefully cleansed from grease. Pare the edges of the rent,
on the right sides, quite clean and even, with a razor, so that both
rent and stitches may be lost in the hairy surface of the cloth.
Scissors do not cut so closely, and are liable moreover, to disturb the
nap, and render the darn more visible. When this is done, fit the edges
exactly together, and overcast them. Then thread a needle with a hair by
the root, and slip it in, 2 or 3 m/m. from the one edge and back again
pointed towards you, through the other, so that, neither needle nor
hair, are visible on either side. The stitches should be set slightly
slanting and must be quite lost in the thickness of the cloth. The
needle must always be put in, exactly at the place where it came out,
and the hair not be too tightly drawn.
When the darn is finished, lay the article on a bare table, or
ironing-board, cover it with a damp cloth, and iron it. The sharpest eye
will fail to detect a rent, when carefully darned in this manner.
PATCHING.--As we have already said, when the defective part is past
darning, it must be cut out, and a new piece of stuff inserted in its
place. If the garment be no longer new, it should be patched with a
slighter material than that of which it was originally made. The patch
should be of the same shape, and cut the same way of the stuff, as the
piece it is to replace, it should also be, just so much larger, as to
allow for the turnings in, and can either be top-sewn, or else, run and
felled in.
BACK-STITCHING AND FELLING IN A PATCH (fig. 52).--Tack in the new
piece, so that its edges over-lap the edges of the hole. The
back-stitching must be done on the article itself, as this renders it
easier to do the corners neatly. The hem is turned down on to the patch.
Make a little snip at the corners with your scissors to prevent
puckering. The back-stitching should form a right angle at each corner.
[Illustration: FIG. 52. BACK-STITCHING AND FELLING IN A PATCH.]
TOP-SEWING IN A PATCH (fig. 53).--To do this, the edges of the hole
and of the patch, must first be turned in, and either overcast or
hemmed, to prevent their fraying, after which, sew the two edges
together. The raw edges may also be turned in with herring-boning as in
fig. 39, putting the needle, only through one layer of stuff.
[Illustration: FIG. 53. TOP-SEWING IN A PATCH.]
DRAWING IN A PATCH (fig. 54).--Take a square piece of the original
stuff, 5 or 6 c/m. larger each way, than the hole it is to fill, draw
out threads on all the four sides, till the piece exactly matches the
hole, and tack it into its place. Thread a very fine needle with the two
ends of a thread of silk or Fil d'Alsace D.M.C No. 700, run it in at the
corner of the stuff, and draw it out, leaving a loop behind. Into this
loop, slip the first of the threads, which as it were, form a fringe to
the patch, and tighten the loop round it, and so on with each thread,
alternately taking up and leaving threads in the stuff, as in ordinary
darning.
[Illustration: FIG. 54. DRAWING IN A PATCH.]
To put a patch into a thin material, in this manner, you must darn in
the threads, a good long way, into the material, in order that the
double layer of threads may be less visible.
FOOTNOTES:
[A] See at the end of the concluding chapter, the table of numbers and
sizes and the list of colours of the D.M.C threads and cottons.
[Illustration: STRIPE OF CUT OPEN-WORK ON WHITE LINEN.]
Single and cut Open-work.
The above heading comprises every sort of needle-work, to which the
drawing out of threads is a preliminary. By sewing over the single
threads that remain, and drawing them together in different ways, an
infinite variety of patterns can be produced. Many pretty combinations
also, can be made of open-work, cross-stitch, and other kinds of
embroidery.
MATERIALS SUITABLE FOR OPEN-WORK.--For all the coarser stuffs, such as
Holbein-linen, Java and linen-canvas and the like, now in such favour
for the imitation of old needlework, it will be best to use: Fil à
pointer D.M.C, No. 30[A] and Cordonnet 6 fils D.M.C, Nos. 10 to 20,[A]
and for the finer stuffs, such as antique-linen and linen-gauze;
Cordonnet 6 fils D.M.C Nos. 50 to 150,[A] Fil d'Alsace D.M.C, Nos. 20 to
100, and Fil à dentelle D.M.C, Nos. 25 to 80.
Coloured patterns can also be executed in open-work, with Coton à broder
D.M.C Nos. 16 to 35, and Coton à repriser D.M.C, Nos. 25 to 50[A].
THE TWO DIFFERENT KINDS OF OPEN-WORK.--The one is called, single
open-work, the Italian Punto tirato, in which the first step is to draw
out one layer of threads; the other, cut open-work, the Italian Punto
tagliato, for which, both the warp, and the woof threads, have to be
drawn out.
SINGLE OPEN-WORK (PUNTO TIRATO).--This, in its simplest form, is the
ornamental latticed hem, in common use where something rather more
decorative than an ordinary hem (fig. 8) is required, and consists in
drawing out one layer of threads, either the warp or the woof.
SINGLE HEM-STITCH (fig. 55).--Draw out, according to the coarseness of
the stuff, two or four threads, below the edge of the turning, and tack
your hem down to the line thus drawn. Fasten your thread in to the left,
and work your hem from right to left, taking up three or four
cross-threads at a time, and inserting your needle, immediately above,
into the folded hem, three or four threads from the edge, and then
drawing it out.
[Illustration: FIG. 55. SINGLE HEM-STITCH.]
The same stitch is used for preventing the fringes, that serve as a
finish to so many articles of house-linen, from ravelling.
SECOND HEM-STITCH (fig. 56).--Prepare your hem as for fig. 55, and
work from left to right; with this difference, that after drawing two or
three cross-threads together, from right to left, you skip the same
number of perpendicular threads you took up below, and insert your
needle downwards from above, bringing it out at the bottom edge of the
hem.
[Illustration: FIG. 56. SECOND HEM-STITCH.]
These stitches, which can be used for the right side also, form a kind
of little tress, along the edge of the hem.
LADDER STITCH HEM (fig. 57). Complete the hem, as already directed in
fig. 55, then draw out three or five threads more, turn the work round,
and repeat the process, taking up the same clusters of threads which
you took up in the first row of stitches, thus forming little
perpendicular bars.
[Illustration: FIG. 57. LADDER STITCH HEM.]
DOUBLE HEM-STITCH (fig. 58). Begin as in fig. 55, forming your
clusters of an even number of threads; and then, in making your second
row of stitches, draw half the threads of one cluster, and half of the
next together, thereby making them slant, first one way and then the
other.
[Illustration: FIG. 58. DOUBLE HEM-STITCH.]
ANTIQUE HEM-STITCH (figs 59, 60, 61 and 62). In the old, elaborate,
linen needlework, we often meet two kinds of hem-stitching seldom found
in modern books on needle-work. Figs. 59 to 62 are magnified
representations of the same. At the necessary depth for forming a narrow
hem, a thread is drawn, in the case of very fine textures where the edge
is rolled, not laid; then fasten in the working thread at the left, and
work the stitches from left to right. Passing your needle, from right to
left, under three or four threads, draw the thread round the cluster and
carry your needle on, through as many threads of the upper layer of
stuff, as you took up below, so that the stitch may always emerge from
the middle of the cluster.
[Illustration: FIG. 59. ANTIQUE HEM-STITCH. WRONG SIDE.]
[Illustration: FIG. 60. ANTIQUE HEM-STITCH. RIGHT SIDE.]
ANTIQUE HEM-STITCH (figs. 61 and 62).--These show, the right and
wrong sides of the hem; here the rolled hem is prepared as above, but
the stitches are worked from right to left, and the thread is carried
round the little roll, so that, as shown in fig. 62, it is visible on
both sides of the hem. The needle does not enter the stuff, but is
carried back at once, from the outside, and put in again between two
clusters of threads.
[Illustration: FIG. 61.--ANTIQUE HEM-STITCH. WRONG SIDE.]
[Illustration: FIG. 62.--ANTIQUE HEM-STITCH. RIGHT SIDE.]
SLANTING HEM-STITCH (figs. 63 and 64).--Bring out your needle and
thread, two or three threads above the edge of the turning, between the
first and second of the three cross-threads that compose the cluster,
and then slip it under the cluster, from right to left. The loop must
lie in front of the needle. When you have drawn up the stitch, put the
needle in, one thread further on, and take up two threads. Fig. 64 shows
the stitch on the right side.
[Illustration: FIG. 63. SLANTING HEM-STITCH. WRONG SIDE.]
[Illustration: FIG. 64. SLANTING HEM-STITCH. RIGHT SIDE.]
DOUBLE-ROWED ORNAMENTAL SEAM (figs. 65, 66, 67).--Begin with any one
of the hems already described, then counting as many threads downwards,
as are clustered together in the first row, draw out a second thread,
and cluster the perpendicular threads in this second line together, as
shown in figs. 65 and 66. On the right side the stitch is straight (fig.
67). Coloured cottons should be used for all the above patterns of
hem-stitch, when they are to be introduced into coloured embroideries.
[Illustration: FIG. 65. DOUBLE-ROWED ORNAMENTAL SEAM. WRONG SIDE.]
[Illustration: FIG. 66. DOUBLE-ROWED ORNAMENTAL SEAM. WRONG SIDE.]
[Illustration: FIG. 67. DOUBLE-ROWED ORNAMENTAL SEAM. RIGHT SIDE.]
SINGLE THREE-ROWED OPEN-WORK (fig. 68).--This, and the following
patterns, are suitable for the headings of hems, and for connecting
stripes of embroidery, and are also often used instead of lace, and lace
insertion.
Fig. 68 will be found specially useful, in cases where the object is, to
produce a good deal of effect, at the cost of as little labour as
possible. Make six rows of hem-stitching, as in fig. 55; the first and
sixth rows to serve as a finish, above and below.
[Illustration: FIG. 68. SINGLE THREE-ROWED OPEN-WORK.]
The second and third, after drawing out six threads, the third and
fourth after drawing out eight. The clusters must all consist of an even
number of threads. The upper and the lower band of open-work is to be
copied from fig. 58, the centre one, from fig. 57. Divide the threads of
the perpendicular clusters in two; insert the needle, from left to
right, underneath half the second cluster, turn the needle's eye, by a
second movement, from left to right, and take up the second part of the
first cluster, drawing it under, and at the same time, in front of the
first half of the second cluster. Be careful not to draw your thread too
tightly.
OPEN-WORK WITH TWO THREADS DRAWN THROUGH (fig. 69).--One such wide
lane of open-work, between two finishing rows of stitches, may have two
threads drawn through it.
[Illustration: FIG. 69. OPEN-WORK WITH TWO THREADS DRAWN THROUGH.]
OPEN-WORK WITH THREE THREADS DRAWN THROUGH (fig. 70). Overcast both
edges with single stitches; draw the clusters together in the middle, as
in fig. 68; then above and below the middle thread, draw in first one
thread and then a second, straight above it, securing the latter with
back-stitches to enclose the clusters between two threads.
[Illustration: FIG. 70. OPEN-WORK WITH THREE THREADS DRAWN THROUGH.]
CLUSTERED OPEN-WORK (fig. 71).--Draw out from sixteen to eighteen
threads, between two hem-stitched edges. Fasten your thread in, 3 m/m.
above the seam-edge, and wind it three times round every two clusters,
passing the needle, the third time, under the two first rounds, to
fasten the thread. The thread, thus drawn through, must be left rather
slack. A second row of stitches, similar to the first, and at the same
distance from the bottom edge, completes this pattern. To give it
greater strength, you may if you like, work back over the first thread,
with a second, taking care to pass it under the knot, which was formed
by the first.
[Illustration: FIG. 71. CLUSTERED OPEN-WORK.]
DOUBLE-ROWED CLUSTER-OPEN-WORK (fig. 72).--A very good effect can be
obtained by making the above stitch in such a manner, as to form groups
of three clusters each, between hem-stitched bands of the stuff.
[Illustration: FIG. 72. DOUBLE-ROWED CLUSTER-OPEN-WORK.]
TURKISH CLUSTER OPEN-WORK (fig. 73).--After portioning off, and sewing
up the clusters on one side, draw out twelve or fourteen threads, and
make your connecting-stitch and hem, all in one, as follows: bring out
the thread before the cluster, and pass it round it, then from right to
left, over three horizontal and under four perpendicular threads, again
from left to right, over the four threads just passed over, and out at
the second cluster; laying it over this, you bring it out behind the
first cluster, wind it round the middle of them both, and pass it
through, between the over-casting stitches back to the hem; encircle the
second cluster with a loop-stitch, and carry your thread again over
three horizontal and four perpendicular threads, and upwards, slanting
underneath the stuff, out in front of the next cluster.
[Illustration: FIG. 73. TURKISH CLUSTER OPEN-WORK.]
OPEN-WORK WITH DARNING STITCH (fig. 74).--Draw out from eight to
twelve threads, according to the quality of the stuff. Insert your
needle and thread between two clusters, and pass it, as if you were
darning, backwards and forwards over them, until they are encased half
way down with stitches. In so doing, work with the eye of the needle
forward, and the point towards your thimble. To pass to the next
cluster, take one stitch back, under the one just darned, and bring your
thread underneath the threads of the stuff, to the second cluster.
[Illustration: FIG. 74. OPEN-WORK WITH DARNING STITCH.]
OPEN-WORK IN THREE COLOURS (fig. 75).--This pattern which is to be
done in the same way as fig. 74, requires the drawing out of, at least,
eighteen threads. Every cross-line of three clusters is to be worked in
one colour. The colours may all be different, or you may if you prefer,
take shades of the same colour.
[Illustration: FIG. 75. OPEN-WORK IN THREE COLOURS. COLOURS: Bleu-Indigo
311, 322, 334, Brun-Caroubier 354, 303, 357, or Rouge-Géranium 349, 351,
352.[A]]
OPEN-WORK INSERTION (figs. 76 and 77).--For both these, the edges are
to be overcast, and the darning stitches packed sufficiently closely
together, for the threads of the stuff to be entirely covered.
Fig. 76 requires the drawing out of eighteen threads, fig. 77, of
thirty. Both admit of several colours being used.
[Illustration: FIG. 76. OPEN-WORK INSERTION.]
[Illustration: FIG. 77. OPEN-WORK INSERTION.]
OPEN-WORK INSERTION (fig. 78).--After drawing out sixteen or eighteen
threads, bind both sides with stitches made over four horizontal and
four perpendicular threads, as follows; make one back-stitch over four
disengaged threads, then bring up your thread from right to left, over
four horizontal and under four perpendicular threads, back over the four
last threads, and draw it out beside the next cluster. The clusters, as
they now stand, are bound together in the middle, three by three, with
darning-stitches. The thread must be fastened in and cut off, after each
group is finished.
[Illustration: FIG. 78. OPEN-WORK INSERTION.]
OPEN-WORK INSERTION (fig. 79).--First bind the two edges with
stitches, in the ordinary way. At the last stitch introduce the thread
slanting, according to the dotted line, pass it under four horizontal
and three perpendicular threads of the stuff and draw it out; then over
three threads from right to left, and back under the same, from left to
right, and out again; over four horizontal threads, and, under and again
over, three perpendicular ones; for the next stitch, you again follow
the dotted slanting line.
[Illustration: FIG. 79. OPEN-WORK INSERTION.]
Then make the darning stitch over nine threads, or three clusters. At
half their length, you leave out three threads, first on the right, then
on the left, whilst in the other half, you, in a similar manner, take in
three; so that you have two darned and two undarned clusters, standing
opposite each other. Finally, you overcast the single clusters, and
connect every two with a lock-stitch, as shown in the accompanying
illustration.
OPEN-WORK INSERTION (fig. 80).--Draw out twenty threads, overcast both
edges with stitches, made over three threads. Then, make slanting
stitches, proceeding out from these, over three, six and nine threads
respectively, all three terminating in a perpendicular line, one below
the other.
[Illustration: FIG. 80. OPEN-WORK INSERTION.]
For the open-work, twist the thread five times, quite tightly round and
round one cluster, bring it to the edge, between the second and third
clusters, and connect these by means of six darning-stitches to and fro:
join the first and second clusters in the same way by twelve stitches,
and finish, by twisting the thread five times round the remaining length
of the first cluster. The second half of the open-work figure is
carried out in a similar manner over the third and fourth clusters.
OPEN-WORK INSERTION IN FOUR COLOURS (fig. 81).--Draw out, from
twenty-five to thirty threads. The outside figures are executed over six
clusters, of three threads each, in a dark and light shade alternately
of the same colour. Each of the middle figures combines three clusters
of the two figures above it, and may be executed, either in a different
colour altogether, or in a lighter shade of the one employed in the top
row. The little star in the centre should be worked in dark red, or
black.
[Illustration: FIG. 81. OPEN-WORK INSERTION IN FOUR COLOURS.
MATERIALS: Coton à broder D.M.C No. 20, or Cordonnet 6 fils D.M.C Nos.
15 to 30.[A]
COLOURS: Rouge-Turc 321, Bleu-Indigo 312, 334, Noir grand Teint 310.[A]]
OPEN-WORK INSERTIONS (figs. 82, 83, 84).--For each of these draw out
forty threads. Fig. 82 worked in white, and Rouge-Grenat clair 309,
comprises fourteen clusters, of four threads each. Begin at the top of
the big pyramid, so that the threads which you run in, can be more
closely crowded together.
[Illustration: FIG. 82. OPEN-WORK INSERTION.]
In fig. 83, the two rows of short clusters are worked in Gris-Tilleul
moyen, and, Gris-Tilleul clair, 392 and 330;[A] the pyramid of steps,
in Brun-Chamois moyen, 324;[A] the three inner clusters in Brim-Chamois
très clair, 418. One figure consists of fourteen clusters, of three
threads each.
[Illustration: FIG. 83. OPEN-WORK INSERTION.]
Fig. 84 also is to be worked in three colours; the light squares in
unbleached cotton, the middle figure in Bleu-Indigo très clair, 334, the
large squares on either side in Brun-Cuir clair 432. Each figure
contains eighteen clusters, of three threads each.
[Illustration: FIG. 84. OPEN-WORK INSERTION.]
OPEN-WORK INSERTION WITH SPIDERS (fig. 85).--The edges are to be
herring-boned, as described in fig. 39. In the middle, the so-called
spiders are made, over every group of four clusters. The thread that
runs out from the spider, passes over two clusters and under one, and
then three or four times, over and under the clusters, as in darning,
and so back, under the spider, at the place at which it was drawn in,
and then on, to the next four strands of thread.
[Illustration: FIG 85. OPEN-WORK INSERTION WITH SPIDERS.]
THREE-ROWED OPEN-WORK (fig. 86).--Draw out five threads for the narrow
stripe, and from fourteen to sixteen for the wide one. Each cluster
should consist of four threads. The narrow bands between, are to be
herring-boned on either side. The dotted line shows the course of the
thread, on the wrong side. Then unite each separate cluster in the
middle, with a back-stitch, as shown in the illustration, and finally,
join every group of four clusters together, with three stitches, and
make a spider in the middle of the open-work, at the point where the
threads intersect each other.
[Illustration: FIG 86. THREE-ROWED OPEN-WORK.]
OPEN-WORK INSERTION WITH RINGS (fig. 87).--Bind the edges on both
sides, with straight, two-sided, stitches. Take, for this, Coton à
broder D.M.C, No. 30, (embroidery cotton), using it double. Draw out,
from twenty-four to thirty threads. Wind your thread six or seven times
round the middle of each cluster of nine threads, and then make
darning-stitches, above and below, to a length of 3 m/m. When you have
completed two clusters, join them together, by four interlocked
stitches; wind your thread three times round the single thread, and sew
it over with close stitches.
[Illustration: FIG 87. OPEN-WORK INSERTION WITH RINGS.]
OPEN-WORK INSERTION WITH SPIDERS (fig. 88).--Draw out twenty-four
threads. Ornament the two edges with half-spiders. You begin these over
two threads, and go on taking in others, to the number of eight. The
whole spider in the middle, is made as above described.
[Illustration: FIG. 88. OPEN-WORK INSERTION WITH SPIDERS.]
OPEN-WORK INSERTION (figs. 89 and 90).--The beauty of this otherwise
simple pattern, lies in the peculiar knot, with which the edges of the
stuff are ornamented.
[Illustration: FIG. 89. OPEN-WORK INSERTION.]
Carry the working thread, as shown in fig. 90, from right to left, (see
the description of the right side) over and under four threads; then
bring the needle back, under the thread which lies slanting, form a loop
with the forefinger of the left hand, slip it on to the needle, and draw
it up close to the first stitch; pull the needle through the knot, and
proceed to the next stitch.
The illustration explains how the open-work in the middle should be
carried out.
[Illustration: FIG. 90. EXPLANATION OF THE STITCH FOR FIG. 89.]
OPEN-WORK WITH WINDING STITCH (fig. 91).--For this pattern, which is a
very laborious one to work, draw out twenty-eight threads. Bind the
edges with two-sided stitches, over two, three, four and five threads,
respectively. For the middle figures, you must reckon four threads for
the clusters, round which the working thread is tightly twisted, eight
for the darned clusters, ornamented with picots (see fig. 165), and
sixteen for the rectangular rosettes, in two colours.
Make a loose spider over the threads, as a background for the rosette.
Work the picots in a different colour from the cluster, and the
rosettes, likewise, in two colours. The connecting loops between the
figures should be made as you go along, the thread being always carried
back into the loop just made.
[Illustration: FIG. 91. OPEN-WORK WITH WINDING STITCH.]
CUTTING OUT THREADS AT THE CORNERS (figs. 92, 93, 94, 95). If you want
to carry a latticed-hem or a simple open-work pattern, round a corner,
you must cut and loosen the threads, on both sides, about one c/m. from
the edge of the hem, as seen in fig. 92. The loose threads can be pushed
into the turning, and the edge button-holed, as in fig. 93.
If however, on the other hand, the stitching be continued without
interruption, as indicated in the upper part of fig. 94, the loose
threads must be brought to the wrong side, and as represented in the
lower part of fig. 94, fastened down with a few stitches.
[Illustration: FIG. 92. THE CUTTING AND LOOSENING OF THE THREADS AT THE
CORNERS.]
[Illustration: FIG. 93. THE OVER CASTING OF THE DISENGAGED EDGE AT THE
CORNER, THE THREADS BEING TURNED IN WITHIN THE HEM.]
[Illustration: FIG. 94. BORDERING THE DISENGAGED EDGE WITH
HEM-STITCHING, THE THREADS BEING TURNED OVER]
[Illustration: FIG. 95. FILLING IN THE CORNER WITH A SPIDER, AND
CONTINUATION OF THE LATTICE-WORK THENCE.]
CUT OPEN-WORK (PUNTO TAGLIATO).--For cut open-work, threads have to be
drawn out both ways, the number of course to depend on the pattern.
Threads, left between others that have been cut out, serve as a
foundation on which a great variety of stitches can be worked. Stuffs,
equally coarse in the warp and woof, should be chosen for all cut
open-work, for then the empty spaces that remain, where threads have
been drawn out both ways, will be perfectly square.
DRAWING OUT THREADS BOTH WAYS (fig. 96).--The same number of threads
must be drawn out each way; most patterns require the same number of
threads to be left as are drawn out. In fig. 96, three threads have been
drawn out and three left.
[Illustration: FIG. 96. DRAWING OUT THREADS BOTH WAYS, WITHOUT REGARD TO
THE EDGES.]
CUTTING OUT THREADS (fig. 97).--We often meet with cut open-work
patterns, set in another kind of embroidery. In such cases, the threads
that are to be cut out, must be cut a few millimetres within the edge,
and then drawn out, so that there may be a frame of the stuff left
intact outside.
[Illustration: FIG. 97. CUTTING OUT THREADS, IN THE MIDDLE OF THE
STUFF.]
BUTTON-HOLING THE RAW EDGES (fig. 98).--In very fine linen textures,
the threads can simply be cut out, but in the case of coarser stuffs,
and when a pattern ends in steps as in figs. 103, 104, 105, the raw
edges must be button-holed as in fig. 98, or 99.
[Illustration: FIG. 98. BUTTON-HOLING THE RAW EDGES OF CUT OPEN-WORK.]
OVERCASTING THE RAW EDGES (fig. 99).--Cording the raw edges, is even
better than button-holing them. Count the number of threads carefully
that have to be cut out, run in a thread to mark the pattern, and then
only, cut the threads through, at least two threads within the line.
[Illustration: FIG. 99. OVERCASTING THE RAW EDGES OF CUT OPEN-WORK.]
OVERCASTING THE TRELLISED GROUND (fig. 100).--If you only have a small
surface to embroider, you can draw out all the threads at once. But in
the case of a large piece of work it is better to begin by removing the
threads in one direction only, and completing all the little bars, one
way first; after which you draw out the threads the other way and
embroider those you leave. In this way you will secure greater equality
and finish in your work.
[Illustration: FIG. 100.--OVERCASTING THE TRELLISED GROUND.]
GROUND FOR SQUARE, FIG. 105 (figs. 101 and 102).--Finish the first row
of bars along the edge completely, to begin with. In the second row,
overcast the bar, down to half its length, then carry your thread over
two empty spaces, see the letter _a_, come back to the bar, overcasting
the thread which you threw across first, and passing the needle under
the bars of the stuff. In the second rows that intersect the first,
marked by letter _b_, the threads meet in the middle of the empty space.
In fig. 102, finish the bars, overcast both ways first, and then fill in
the ground with interlaced threads, worked row by row, throwing the
thread from one square to the other as you go, and doubling it, as you
return. For the bars, see the chapters on net embroidery, and Irish
lace.
[Illustration: FIG. 101. LATTICE-GROUND FOR SQUARE IN FIG. 105, SHOWING
THE COURSE OF THE STITCHES.]
[Illustration: FIG. 102. LATTICE-GROUND FOR SQUARE IN FIG. 105.]
LATTICE-GROUND AND DAMASK STITCH FOR SQUARE, FIG. 105 (fig. 103).--Our
illustration shows a third kind of openwork ground with one corner in
damask stitch, of the square represented in fig. 105. The little bars
which intersect each square crossways, are made in two divisions, by
carrying the thread to the opposite bar and back. In the same way, the
second thread is carried over the first. The damask stitches are
described in the next chapter, in figs. 143 and 144.
[Illustration: FIG. 103. LATTICE-GROUND WITH A PORTION OF SQUARE, FIG.
105.]
LATTICE-GROUND AND DAMASK STITCHES FOR SQUARE, FIG. 105 (fig.
104).--Damask, or gobelin stitches, are given in figs. 152, 153, 154.
The ground of this part of the square (fig. 104) is adorned with narrow
bars, worked in darning stitch. From the centre of one bar, proceed
three bars made on three foundation-threads, and a fourth made on two,
on account of the passage to the next bar.
[Illustration: FIG. 104. LATTICE-GROUND AND DAMASK STITCH FOR SQUARE,
FIG. 105.]
QUARTER OF THE SQUARE IN SINGLE AND CUT OPEN-WORK, AND DAMASK-STITCH
(fig. 105).--Original size 48 c/m. square. This handsome square is
worked in unbleached cotton on a white ground; it may also be worked in
colours. A very good effect is produced by using Chiné d'or D.M.C[A]
red, blue, or green for the gobelin stitch, and a uniform pale tint for
the cut open-work.
Figs. 101, 102, 103, 104 illustrate in detail, one quarter of the
square, which is represented here one third of the original size. The
centre piece (fig. 104) is bordered by four stripes, two long and two
short; the former containing two lozenge-shaped open-work figures
separated and finished off by damask stitches; the latter, only one such
figure. For the insertion in single open-work, that recurs three times,
you will find a variety of designs in figs. 81, 82, 83, 84, 87, 88.
[Illustration: FIG. 105.--QUARTER OF THE SQUARE IN SINGLE AND CUT
OPEN-WORK, AND DAMASK STITCH.
Original size 48 c/m. square.
MATERIALS suitable for Holbein linen: Fil à pointer D.M.C No. 15 or 20,
and Coton à repriser D.M.C No. 25.[A]
For antique linen: Fil à dentelle D.M.C No. 25 or 30, or Cordonnet 6
fils D.M.C No. 50, 60, or 70, and Coton à repriser D.M.C No. 50 or, in
place of the latter, Coton à broder surfin D.M.C No. 190.[A]]
DRAWING IN THE PATTERN (fig. 106).--Darning in the threads, as you do
into a net foundation is a slower process and one that requires greater
skill than drawing them in. The illustration shows the proper order and
direction of stitches for Fig. 108. In this case likewise, the little
bars must be finished, before the actual pattern is filled in.
[Illustration: FIG. 106. DRAWING IN THE PATTERN. (Explanation of fig.
108)]
DARNING IN THE THREADS (fig. 107)--In old needle-work we often find
the pattern reserved, that is, left blank and outlined by the grounding.
As it is difficult, especially in executing minute, and delicate
figures, to withdraw the threads partially, without injuring the linen
foundation, they are withdrawn throughout, and new ones drawn in, to
form the pattern. To explain this more clearly, the original threads of
the material are represented in a lighter shade than the new ones that
are drawn in; the course of the stitches is indicated in a darker shade.
[Illustration: FIG 107. DARNING IN THE THREADS. (Explanation of fig.
109).]
BROAD INSERTION IN CUT OPEN-WORK, WITH THE PATTERN DRAWN IN (fig.
108).--This insertion, suitable according to the foundation it is worked
on, for the decoration either of curtains, table-covers, bed-linen or
underclothing, is made as shown in fig. 106. If intended for the
decoration of any article made of white linen, we recommend unbleached
materials for the lattice-work, and bleached for the pattern, to bring
it out in strong relief.
[Illustration: FIG. 108. BROAD INSERTION IN CUT OPEN-WORK, WITH PATTERN
DRAWN IN.]
INSERTION IN CUT OPEN-WORK, WITH PATTERN DARNED IN (fig. 109).--This
insertion can be introduced into any kind of linen material, and used
for ornamenting towels, aprons, bed-linen and table-linen. When it is
used to connect bands of cross-stitch embroidery, the open-work should
be of the same colour as the embroidery, and the pattern worked in white
or unbleached cotton, to correspond with the foundation. In fig. 109,
the pattern is half as large again as in the original.
[Illustration: FIG. 109. INSERTION IN CUT OPEN-WORK, WITH PATTERN DARNED
IN.
MATERIALS--For Holbein linen: Fil à pointer D.M.C No. 15 or 20,
Cordonnet 6 fils D.M.C No. 8, 10 or 15 for the bars.--Coton à tricoter
D.M.C No. 16 or Coton à repriser D.M.C No. 12 or 25 for darning or
drawing in the pattern.
For finer linens: Fil à dentelle D.M.C Nos. 25 to 30, or Cordonnet 6
fils D.M.C Nos. 25 to 40 for the bars and Coton à repriser D.M.C No. 50
for darning or drawing in the pattern.]
CUT OPEN-WORK PATTERN (figs. 110 and 111).--This pattern, more of the
nature of lace than any of the former, is well adapted for trimming, not
only household articles but also church furniture, altar-cloths and the
like, which are required to wash, as it can be worked in any width.
Fig. 110, a magnified representation of the work in process of
execution, shows alternately, ten threads withdrawn each way and six
left, with open spaces between. The arcs are worked over three
carefully laid threads, carried across from the middle of one bar to the
middle of the bar at right angles to it, the wheels on the other hand
are begun and finished at the same corner. Overcast the cut edges, and
hem-stitch the outside layer of stuff (figs. 61 and 62).
[Illustration: FIG. 110. CUT OPEN-WORK PATTERN. Fig. 111 in process of
execution.]
[Illustration: FIG. 111. CUT OPEN-WORK PATTERN. MATERIALS: Fil à pointer
D.M.C No. 20 or 30, Cordonnet 6 fils D.M.C Nos. 15 to 50 or Fil à
dentelle D.M.C Nos. 25 to 50.]
GREEK CUT OPEN-WORK PATTERN (fig. 112).--After the foregoing
explanations, no difficulty will be found in copying the beautiful Greek
cut open-work pattern, illustrated in fig. 112. Here, we have in the
original, 48 threads drawn out in the middle, both ways, from one
straight bar to another, (these bars being darned) with open spaces
between; and in the lower and narrower division, 21 threads drawn out
each way. The cut edges, from bar to bar, are hem-stitched on both
sides, leaving four threads of the stuff between.
The long bars, in the second figure, are button holed on both sides,
those with the picots, on one side only.
[Illustration: FIG. 112. GREEK CUT OPEN-WORK PATTERN. MATERIALS:
Cordonnet 6 fils D.M.C Nos. 25 to 50, Fil d'Alsace D.M.C Nos. 20 to 100
or Fil à dentelle D.M.C Nos. 25 to 50.]
FOOTNOTES:
[A] See, at the end of the concluding chapter, the table of numbers and
sizes and the list of colours of the D.M.C threads and cottons.
[Illustration: NET STRIPE, IN IMITATION OF BRUSSELS LACE.]
Net and damask stitches.
Many net embroidery patterns and damask stitches consist of a
combination of ordinary running and darning, others of chain, stem and
cross stitch.
NET EMBROIDERY.--All these kinds of stitches can be worked on the
coarse Greek net, as it is called, as well as on the finest quality of
real Brussels net.
Stripes of net, finished off with button-hole edging, and ornamented
with one or other of the following patterns, make very pretty washing
laces and the like; net laid upon Irish point and converted by
needlework into a lace ground, makes an excellent substitute for a
hand-made ground, which demands much labour and time.
MATERIALS SUITABLE FOR NET EMBROIDERY.--The choice of material must be
determined by the quality of the net and the effect to be produced. For
a coarse make of net and a very marked pattern, the lowest numbers of
D.M.C cottons, or the narrowest braids, such as Soutache D.M.C Nos. 1,
2, 3 should be used; if the net be fine and the pattern a delicate one,
then the higher numbers of the following are preferable: Coton à
tricoter D.M.C Nos. 8 to 20, Coton à repriser D.M.C Nos. 25 to 70, Coton
à broder D.M.C Nos. 16 to 50, Fil à dentelle D.M.C Nos. 25 to 50, Coton
à broder surfin D.M.C Nos. 100, 120, 150. The latter must be adjusted to
the required size before being used, that is to say as many strands of
it removed, as is necessary in order to reduce it to the proper
thickness.
TRACING WITH RUNNING STITCHES (fig. 113).--Have your pattern traced on
linen or paper; tack the net upon it, and copy it carefully on the net
with running stitches. As in darning, the stitches must run first above
and then beneath, alternating in each succeeding row. At the turn of the
lines, the stitches cross each other, as shown in the illustration.
[Illustration: FIG. 113. TRACING WITH RUNNING STITCHES.]
NET PATTERN (fig. 114).--Here too the pattern is traced with running
stitches, which are run in on both sides of each row of meshes. The
thread is carried first to the right, and then to the left, under every
alternate bar of the net and out again. Between the first and second
rows, one thread of the foundation must be left uncovered. In the next
row, the thread is carried back again, so that it encircles each mesh.
In the third row, the thread passes under the same bar of net as in the
second, the threads touching each other. The fourth row is a repetition
of the first.
[Illustration: FIG. 114. NET PATTERN.]
NET PATTERN (fig. 115).--This consists of two rows of stitches. In the
first, the single stitches run diagonally from left to right, over and
under a mesh; in the second row the triple stitches, also carried
diagonally across a mesh, lie from right to left.
[Illustration: FIG. 115. NET PATTERN.]
NET PATTERN (fig. 116).--Begin with a double row, as in fig. 114; this
is followed by a row of cross-stitch, touching the others, for which the
thread has to be carried, first under one of the straight bars of the
mesh and then diagonally, across it. A second, similar row of stitches
backwards, completes the crosses. This can be further varied by the
introduction of a row of triple stitches, after the double row, as in
fig. 115, and the repetition of the two first only.
[Illustration: FIG. 116. NET PATTERN.]
These rows can also be worked in two colours, or in white thread and
washing gold.
NET PATTERN (fig. 117).--Begin at the top, carrying the thread, first
under and then over two bars and a mesh, and then underneath as before.
In the second as in the first row, the threads must be drawn in, so that
4 threads always meet in one mesh, and two run parallel to each other
through the same mesh.
[Illustration: FIG. 117. NET PATTERN.]
NET PATTERN (fig. 118).--This pattern, which resembles fig. 117 in the
execution, is thickened by triple stitches. Above, where in the
preceding row three threads were laid, the thread should be single.
[Illustration: FIG. 118. NET PATTERN.]
Very pretty varieties are to be obtained by the introduction of several
colours. Take white, for instance, for the first row, and different
shades of the same colour for the second, third, fourth and fifth rows;
such as, Bleu-Lapis 345, 344, 343, 333, 342, ([A]) or Rouge-Cardinal
348, 305, 304, 347, 346, ([A]) or Rouge-Géranium, Brun-Caroubier or any
other colour that is absolutely fast.
NET PATTERN (fig. 119).--After one row of cross-stitch, such as was
described in fig. 116, add a second, carrying the thread under the bar
that lies between the first stitches, so that the two rows only cover
three threads of the net. The close bands of cross-stitch must be
divided from each other by one row of net bars.
[Illustration: FIG. 119. NET PATTERN.]
NET PATTERN (fig. 120).--Draw the thread twice backwards and forwards,
as in darning, through one row of meshes. In the next, make four
stitches over one mesh and two bars. After the fourth stitch, the thread
is carried forward under two bars to the next group. The meshes filled
in thus are divided from each other by two double rows of darning
stitches. Here you may introduce a variety in the colour, using either
white and unbleached, or unbleached and pale blue, or some other
combination of the kind.
[Illustration: FIG. 120. NET PATTERN.]
NET PATTERN (fig. 121).--Make three diagonal stitches over three bars
and two meshes, then returning to the mesh out of which the first
stitches come, make three more in the opposite direction. In the second
row, the stitches meet in the same mesh as those of the first.
[Illustration: FIG. 121. NET PATTERN.]
NET PATTERN (fig. 122).--Carry the thread upwards from below, over a
bar of the net, then pass it horizontally under another bar and carrying
it downwards, pass it under a diagonal bar and cover the other three. In
the second row, your loops must be turned the opposite way. When the
whole foundation is finished, run a thread over the whole surface and
overcast it. A good effect is produced by using white and unbleached
cottons, in alternate rows.
[Illustration: FIG. 122. NET PATTERN.]
NET PATTERN (fig. 123).--This pattern consists of one row of
overcasting, one of stitches like those described in fig. 114, and one
of cross-stitch, as in fig. 39, running diagonally across the stuff.
Besides the cottons already mentioned, washing gold thread (Or fin D.M.C
pour la broderie), may be used for the overcasting. Dead gold introduced
into simple needlework of this kind enlivens it extremely.
[Illustration: FIG. 123. NET PATTERN.]
NET PATTERN (fig. 124).--Three kinds of stitches are required for this
pattern. In the first row the stitch lies crossed underneath the net; in
the second, 3 stitches are made over one mesh, the first and the last of
which are carried across three meshes. In the third row, button-hole
stitches are carried from right to left over two diagonal bars, in such
a manner that the thread is drawn through the mesh facing the loops, and
the next stitch comes out under the loop of the preceding one.
[Illustration: FIG. 124. NET PATTERN.]
NET PATTERN (fig. 125).--Fill in every other diagonal row of meshes
with chain stitch, inserting the needle into the same mesh it came out
of, so that the thread lies in front of the needle, in a loop. The rows
of chain stitch may be made with two or three rows of meshes between
them. Even the diagonal lines by themselves, make a very pretty
foundation for other stitches.
[Illustration: FIG. 125. NET PATTERN.]
NET PATTERN (fig. 126).--The first row worked from left to right,
consists of three loop stitches upwards and three downwards, each over
one bar. In the second row, divided from the first by one row of
stitches, the inner loops must be turned towards each other; in the
third, the outer ones. Any of the stitches, already described, can be
introduced into this pattern to enliven it.
[Illustration: FIG. 126. NET PATTERN.]
NET INSERTIONS (figs. 127 and 128).--These two, as well as the
subsequent patterns, are most of them worked in darning stitch and
simple overcasting.
The scallops in fig. 127 are formed of darning stitches, over 4, 3, 2
and 1 mesh, respectively. In the intervening space, which is five meshes
wide, the stitch shown in fig. 118, may be introduced.
[Illustration: FIG. 127. NET INSERTION.]
In repeating the pattern, the stitches forming the scallops, must be
made to run in the opposite direction. Instead of the thread, simply
drawn through the middle, little stars like those described in fig. 134,
have a very pretty effect.
In fig. 128, the thread is first carried round one mesh and then on to
the next scallop. In the second scallop, which turns the opposite way,
the thread is carried once more round the last mesh after the pyramid is
completed, and then on, to the next figure.
[Illustration: FIG. 128. NET INSERTION.]
NET PATTERN (fig. 129).--This checked pattern is also worked in
darning stitch. Carry the thread, as in fig. 125, through every second
row of meshes. When the bottom rows are all finished, the upper ones are
worked across them in the same way. Here the stitches may, if preferred,
be distributed more sparingly. But if they are set wider apart, the
spaces between should be filled up in some way. Little dots, made of
Coton à repriser D.M.C, will answer the purpose best.
[Illustration: FIG. 129. NET PATTERN.]
NET INSERTIONS (figs. 130, 131, 132).--These three patterns are
specially suitable, for insertions, neck-tie lappets and the like, in
the place of crochet, pillow, and other kinds of lace. Both design and
stitch are clearly enough represented in the subjoined figure for
further explanation to be unnecessary. All three should be worked with
rather coarse cotton, and Soutache D.M.C[A] (braid) drawn in, produces
an excellent effect.
[Illustration: FIG. 130. NET INSERTION.]
[Illustration: FIG. 131. NET INSERTION.]
[Illustration: FIG. 132. NET INSERTION.]
NET PATTERN (fig. 133).--These delicate little figures can be worked
into a close pattern, or can be strewn singly over the surface. The
closer you set the stitches, the more clear and distinct the stars will
be. The thread must be drawn in to the centre mesh from without, so as
to be invisible if possible, and then back again to the outside when the
stitches are finished.
[Illustration: FIG. 133. NET PATTERN.]
NET PATTERN (fig. 134).--These flowerets have a very pretty effect,
set either singly, or in double or triple rows, and are very useful for
filling up gaps or supplementing rows.
[Illustration: FIG. 134. NET PATTERN.]
NET PATTERN (fig. 135).--These star-shaped figures, their longest
stitch covering three straight bars and two meshes, the shortest, three
diagonal bars and two meshes, may like the above flowerets, be ranged
closely together in rows, so that four stitches, two horizontal and two
vertical ones, meet in one mesh. Cotton of two colours should be used,
in order that the figures may be distinct from each other: white and
unbleached are the best, in cases where bright colours would be
unsuitable.
[Illustration: FIG. 135. NET PATTERN.]
NET INSERTION (fig. 136).--These diamonds make a very pretty grounding
either set separately, or in a continuous pattern. The design is slight,
nevertheless, when it is worked in coarse cotton, the effect is
exceedingly handsome, especially if the inside, in addition to the star
here given, be enriched with ordinary darning-stitches, worked in fine
gold thread, as we have already mentioned.
[Illustration: FIG. 136. NET INSERTION.]
NET TRACERY WITH BORDER (fig. 137).--In order to bring out the pattern
and the colours, use instead of cotton, Soutache D.M.C, or Lacets
surfins D.M.C. Both are to be had in all the colours, given in the list
of colours of the D.M.C threads and cottons. The little border can be
used in conjunction with any of the preceding patterns, but care must
be taken not to let it get twisted in the working. To prevent this,
slip a coarse needle under the last stitch, and draw the braid flat over
it.
[Illustration: FIG. 137. NET TRACERY WITH BRAIDS. MATERIALS: Soutache
D.M.C No. 2 in Bleu-Indigo 334 and Rouge-Turc 321.]
BROAD NET LACE TRACERY (fig. 138).--The pattern of this pretty lace
must first be transferred to stout paper, or oil-cloth. All the leaves
and stalks, and the buttonholing round the open centres of the flowers,
are worked in a pale green, the two bottom flowers in Turkey red, the
star-shaped one in blue, the calyx in which the stalks unite, in dark
red, and the little bells, in the lightest green.
[Illustration: FIG. 138. BROAD NET LACE TRACERY. MATERIALS: Coton à
broder D.M.C No. 30, 35 or 40.--COLOURS: Rouge-Turc 321, Rouge-Cardinal
346, Bleu-Indigo 322, Gris-Tilleul 393 and Vert-Pistache 369.]
NET DARNING.--We conclude with some directions for darning net, a
valuable art, by means of which many a curious piece of old needlework
is preserved. Coarse and fine net are all darned in the same way.
Laying the first thread (fig. 139).--Tack the net which is to be darned,
closely to the defective part, upon either oil-cloth or coloured paper
and cut the edges straight to the thread; Your thread must be of exactly
the same size, as that of which the net is made. It takes three rows of
stitches to imitate the net ground; in the first place, as shown in fig.
139, cross-threads must be laid from side to side, carried as in
darning, a little beyond the edges of the hole and so as to surround
each mesh with a slanting stitch.
[Illustration: FIG. 139. NET DARNING. LAYING THE FIRST THREAD.]
LAYING THE SECOND THREAD (fig. 140).--Secondly, beginning from one
corner, threads are laid diagonally across the first layer. The
cross-threads of the foundation are encircled by a stitch, made from
right to left, the needle is then carried under the next horizontal bar,
and the first layer of threads is overcast with similar stitches.
[Illustration: FIG. 140. NET DARNING. LAYING THE SECOND THREAD.]
LAYING THE THIRD THREAD (fig. 141).--Thirdly, threads are carried
across the second and first layers. They must start, far enough from the
edge, for the second layer of threads to be overcast at the same time,
so that there may be no loose threads left on the wrong side. In this
third journey, every diagonal thread of the foundation is to be
encircled with a stitch, taken upwards from below, the cut edges being
strengthened in the same way. Then, to form the little cross in the
fabric, the thread must be conducted by means of a second stitch, under
the single horizontal thread, outwards, to the next-diagonal thread.
[Illustration: FIG. 141. NET DARNING. LAYING THE THIRD THREAD.]
In places where the net is worn, it can be strengthened in the same
manner, the stitches being made the way of the stuff.
DAMASK STITCHES.--As a rule the pattern is simply outlined with stem
and cord stitch, and the inside spaces are left plain. In spite of the
time this simple tracing takes to do, the effect is rather poor and
scanty. If however, the inside of the leaves and flowers, be filled in
with damask stitch, the result is very handsome.
Not only can the following stitches, which are suitable for any linen
coarse or fine, be used for this kind of embroidery, but most of the net
and lace patterns too, and these combined with buttonholing and flat
stitch produce charming effects.
MATERIALS SUITABLE FOR DAMASK STITCHES.--All the threads and cottons
used for net work can also be used for damask stitches, according to
the material and the kind of work. We will enumerate them once more:
Coton à tricoter D.M.C Nos. 8 to 20, Coton à repriser D.M.C Nos. 25 to
70, Coton à broder D.M.C Nos. 16 to 50, Fil à dentelle D.M.C Nos. 25 to
50, Coton à broder surfin D.M.C Nos. 100, 120, 150.[A]
This kind of embroidery is generally done with a very coarse needle, to
press the threads of the stuff closely together and make the light
spaces between, which appear in many of the following illustrations.
FIRST PATTERN (fig. 142).--Carry the needle in a slanting direction
over three threads and bring it out, from right to left, under three
perpendicular ones, then again slanting, over three threads, from left
to right, and out again underneath three horizontal ones, downwards from
above. Thus the first stitch lies across, from right to left, the
second, lengthways. On the wrong side, the stitch forms a regular
succession of steps.
[Illustration: FIG 142. FIRST PATTERN]
SECOND PATTERN (fig. 143).--This is worked exactly in the same manner
as fig. 142, only that the second row of stitches touches the first, so
that two threads enter and issue from the same hole.
[Illustration: FIG 143. SECOND PATTERN]
THIRD PATTERN (fig. 144).--Though at first sight, this stitch is very
like the Holbein or stroke stitch, it is very different in the
execution. It is worked in two rows, to and fro; in the first, you make
all the vertical stitches side by side in the width of the stuff,
drawing your thread very tightly, in the second, coming back, you make
the horizontal stitches in a straight line, at right angles to the first
stitches. On the wrong side the stitches are crossed; they in thin
stuffs, show through, and quite alter the appearance of the right side.
[Illustration: FIG. 144. THIRD PATTERN.]
FOURTH, PATTERN (fig. 145).--In the first row, the thread is carried
slanting upwards from right to left, over two threads, then downwards
under two. Coming back, the stitches must be set the opposite way, so
that four threads meet in one hole.
[Illustration: FIG. 145. FOURTH PATTERN.]
FIFTH PATTERN (fig. 146).--This is worked like fig. 145, only that the
stitches must cover three threads each way. In the second row, you take
up one thread on the right and two on the left, to form your stitches.
[Illustration: FIG. 146. FIFTH PATTERN.]
SIXTH PATTERN (fig. 147).--Here, the stitches form a chess-board
pattern. You begin with a diagonal stitch over two threads and bring
your needle up again into the same line it started from. The second
stitch covers three threads, the third six, the fourth eight; the next
three decrease, successively in length, in the same proportion.
[Illustration: FIG. 147. SIXTH PATTERN.]
SEVENTH PATTERN (fig. 148).--Two kinds of cotton have to be used for
this pattern, one of them soft and flat, like Colon à repriser D.M.C[A]
(darning cotton) or Coton à tricoter D.M.C (knitting cotton)[A] for the
flat stitches, and the other strongly twisted, like Cordonnet 6 fils
D.M.C No. 8, 10, 12 or 15,[A] for the cross stitches.
[Illustration: FIG. 148. SEVENTH PATTERN.]
The five flat stitches cover three threads in width and six in height,
and lie from right to left and from left to right. In the second row,
which must be two threads distant from the first, the stitches must lie
in the contrary direction. In the lozenge-shaped space between, make
four cross stitches, over four threads in height and two in width.
EIGHTH PATTERN (figs. 149 and 150).--Make five stitches over 8
horizontal threads, miss 6 threads and make another 5 stitches. The
groups of long stitches above and beneath the first row, encroach over
two threads of the first group, so that a space of only four threads
remains between two groups. The stitch between these groups is generally
known as the rococo stitch.
[Illustration: FIG. 149. EIGHTH PATTERN.]
Bring out your needle between the third and fourth of these threads, and
insert it again above, drawing it out afterwards between the second and
third horizontal thread, and securing the first stitch with a back
stitch. Make the three remaining stitches, as explained in fig. 150.
[Illustration: FIG. 150. EXPLANATION OF THE ROCOCO STITCH IN FIG. 149.]
NINTH PATTERN (fig. 151).--This consists of straight bands of flat
stitches, covering three threads each way, with spaces 8 threads wide
between, ornamented with a small pattern in stroke stitch, (see chapter
on Tapestry and Linen embroidery).
[Illustration: FIG 151. NINTH PATTERN.]
DAMASK STITCH FOR FIGS. 103 AND 105 (fig. 152).--The stitches, here
represented on a large scale, form the border to the square in cut
open-work in fig. 105. The long diagonal stitches, on either side, can
be made to look fuller and more distinct, by using a soft, coarse
cotton.
[Illustration: FIG. 152. DAMASK STITCH FOR FIGS. 103 AND 105.]
TENTH AND ELEVENTH PATTERNS (figs. 153 and 154).--The former of these
is used for filling in the short stripe in fig. 105, the second for the
long inside one. Fig. 153 is clear enough to need no explanation; with
reference to fig. 154, it is however as well to point out that the
shortest stitch should cover 4 threads and the longest 12, the rest is
easily learnt from the illustration. This is a very suitable design for
the decoration of large surfaces and combines well with any running
diagonal pattern, when it can be made to form a large star which can be
worked as a separate figure.
[Illustration: FIG. 153. TENTH PATTERN. DAMASK STITCH FOR FIGS. 104 AND
105.]
[Illustration: FIG. 154. ELEVENTH PATTERN. DAMASK STITCH FOR FIG. 105.]
TWELFTH PATTERN (fig. 155).--In cases where this and the following
stitches are to be executed on a light, transparent stuff, it is best to
use a very strongly twisted thread, such as Fil d'Alsace D.M.C ([A]) or,
Fil à dentelle D.M.C ([A]) instead of a softer and looser material. A
stiff thread compresses the threads of the stuff better and the open
spaces, thus made in it, are rendered more visible.
[Illustration: FIG. 155. TWELFTH PATTERN.]
Count 6 threads vertically, put in the needle and draw it through from
right to left, underneath 3 diagonal threads. For the next stitch, carry
it upwards over 6 threads, and back under 3. The second row is worked
back over the first in the same way. Leave 6 threads between each row.
THIRTEENTH PATTERN (fig. 156).--Carry the thread, from right to left
over four vertical threads, and under the same number of horizontal
ones. The second row of stitches touches the first, so that the thread
it is worked with seems to be drawn through under the same threads of
the stuff, as the one the first row was worked with.
[Illustration: FIG. 156. THIRTEENTH PATTERN.]
FOURTEENTH PATTERN (fig. 157).--Here, the stitches, contrary to those
in fig. 147, are set vertically. The first stitch covers 2 threads, the
second 6, the third 10, the fourth 14, the fifth 18. The longest
stitches of two checks always meet in the same hole.
[Illustration: FIG. 157. FOURTEENTH PATTERN.]
FIFTEENTH PATTERN (fig. 158).--Cover the whole expanse with rows of
stitches, such as are described in fig. 155, with intervals of 12
threads between them.
[Illustration: FIG. 158. FIFTEENTH PATTERN.]
These rows are intersected by others, to which the thread is passed,
from between the sixth and seventh of the 12 threads between the first
rows. Where the stitches of the two rows meet, the working thread of the
second row must be drawn through, under that of the first.
SIXTEENTH PATTERN (fig. 159).--Between every two rows of cross-stitch,
leave an interval of 6 threads, counting those on each side of the rows.
Over these 6 threads work 2 rows, as shown in fig. 148, but so, that in
the second, the lower stitch of the first row and the upper one of the
second, cover the same threads.
[Illustration: FIG. 159. SIXTEENTH PATTERN.]
SEVENTEENTH PATTERN (fig. 160).--This consists of stripes, 4 stitches
wide, like those of fig. 155, with 3 threads between, which are overcast
in the ordinary manner.
[Illustration: FIG. 160. SEVENTEENTH PATTERN.]
EIGHTEENTH PATTERN (fig. 161).--Small squares of 7 stitches, inclined
alternately, to the right and left, and so formed, that the longest
stitch of one square is crossed by the first short stitch of the next,
so that a space only 6 threads wide and 4 long, remains uncovered. The
intervening stripes are filled with 3 rows of overcasting stitches,
covering 2 threads each way.
[Illustration: FIG. 161. EIGHTEENTH PATTERN.]
NINETEENTH PATTERN (fig. 162).--The steps formed by this pattern are
11 stitches high, and 11 wide, and each stitch covers 4 threads.
[Illustration: FIG. 162. NINETEENTH PATTERN.]
Eight threads intervene between each row of steps, which are covered at
the bend, by a square of stitches, from the last of which, the thread is
carried on at once, to the four single stitches.
TWENTIETH PATTERN (fig. 163).--The 4 squares set opposite to each
other, with 2 threads between, are edged all round by 3 rows of
overcasting.
[Illustration: FIG. 163. TWENTIETH PATTERN.]
TWENTY-FIRST PATTERN (fig. 164).--Begin by rows of stitches, like
those described in fig. 155, over 4 and 2 threads, with 4 threads
between, not counting those covered with cross-stitch. Between the two
rows of cross-stitch, join 6 threads together by a back-stitch, and
carry your thread over the two last of the 6, to the 2 first of the next
cluster. The narrow diagonal stripes are separated by 24 threads,
exclusive of those covered by the cross-stitches. These spaces are
filled in with squares, 10 threads wide and 10 long, formed by
back-stitches crossed on the wrong side.
[Illustration: FIG. 164. TWENTY-FIRST PATTERN.]
TWENTY-SECOND PATTERN (fig. 165).--In the closer stuffs, of a coarse
texture, the threads of which do not admit of being drawn together, as
you can those, of a loose thin stuff, where, by simply pulling your
thread a little tighter you get open spaces, you must begin by cutting
out every fourth or fifth thread. After which, you overcast all the
rows, first one way, and then the other, with stitches covering 4
threads, each way. On this foundation with strong, loosely-twisted
cotton, Coton à broder D.M.C or Coton à tricoter D.M.C No. 25, 30, 35,
or 40, make long stitches, as indicated in the illustration.
[Illustration: FIG. 165. TWENTY-SECOND PATTERN.]
TWENTY-THIRD PATTERN (fig. 166.)--From the point where the thread
comes out of the stuff, make 16 stitches, four times over, all coming
out of the same hole, over 8, 6, 4 and 6 threads, thus forming a star.
Leave an interval of four threads between the stars, and unite the
intervening threads by cross-stitches one way, and whip-stitches, the
other.
[Illustration: FIG. 166. TWENTY-THIRD PATTERN.]
TWENTY-FOURTH PATTERN (fig. 167).--Make a succession of diagonal
stitches, increasing in length, and advancing one thread at a time,
until the seventh stitch covers seven threads, and completes the
triangle. Then begin a second triangle on the nearest, adjacent thread.
[Illustration: FIG. 167. TWENTY-FOURTH PATTERN.]
TWENTY-FIFTH PATTERN (fig. 168).--Cover your whole surface with
squares of 16 stitches, as in fig. 147, and fill in the intervening
squares with 23 stitches, all radiating from one centre.
[Illustration: FIG. 168. TWENTY-FIFTH PATTERN.]
TWENTY-SIXTH PATTERN (fig. 169).--Diagonal trellised stripes, made as
indicated in fig. 165, and overcast, form the ground. Twelve threads are
to be left between the stripes, upon which, work six-cornered,
lozenge-shaped groups of stitches, set at right angles to each other, in
diagonal rows.
[Illustration: FIG 169. TWENTY-SIXTH PATTERN.]
TWENTY-SEVENTH PATTERN (fig. 170).--We conclude our chapter with a
circular design, which combines a variety of stitches, and introduces
our workers to two new patterns, as well as to an advantageous way of
hiding the junction of several kinds of stitches by semicircles of
button-hole stitching.
[Illustration: FIG. 170. TWENTY-SEVENTH PATTERN.]
FOOTNOTES:
[A] See at the end of the concluding chapter, the table of numbers and
sizes and the list of colours of the D.M.C threads and cottons.
[Illustration: STRIPE IN FLAT AND RAISED SATIN STITCH, AND MADEIRA
EMBROIDERY.]
White Embroidery.
We have retained the familiar term, white embroidery, for this kind of
needlework, for convenience sake, in spite of its inaccuracy, now that
coloured materials are quite as much used for it as white.
It is executed, either on a backing of oil-cloth, or in an embroidery
frame, called «tambour-frame». Only skilful workers can dispense with
these, for an untrained hand can hardly avoid puckering. If you work
without a foundation, the material must be held, quite smoothly over the
forefinger, so that the threads lie perfectly straight, otherwise, the
pattern is very apt to get pulled out of shape in the working. With your
three other fingers you hold the material fast, the thumb resting on the
work itself, beyond the outline of the pattern, which must be turned
towards the worker. It is always the outside line of a pattern that is
drawn in double lines, that should be turned towards the palm of the
hand.
TRACING PATTERNS.--Patterns are generally to be had ready traced, but
as it is often necessary to repeat, enlarge, or reduce them,
descriptions of several modes of doing so, will be found at the end of
the concluding chapter.
MATERIALS.--A loose, soft make of cotton, the looser the better, and
very little twisted, is the best material for embroidery. We recommend
for white embroidery in general, Coton à broder D.M.C Nos. 16 to 150;
for monograms on cambric, Coton à broder surfin D.M.C Nos. 100, 120,
150;[A] and for English or Madeira embroidery, Coton Madeira D.M.C Nos.
40, 50, 60;[A] for padding, or raising the embroidery, all the
different kinds of Coton à repriser D.M.C[A] can be used.
OUTLINING AND PADDING.--The outlining of a pattern is a very important
preliminary. A want of precision in the ultimate effect is often due,
merely to careless outlining. This part of the work should be done with
rather a coarser cotton than the embroidery itself. Fasten in the thread
by a few running stitches, never with a knot, a rule to be observed also
in embroidering, except in very rare cases. Finish off your thread by
drawing it through the tracing stitches, or through some part of the
pattern that is already finished. Fill in the spaces between the lines
with a padding of run threads, run loosely, and so that they lie thickly
and solidly in the centre, and shade off on both sides. The fullness,
and roundness of embroidery, depends on the firmness of this sub-stratum
of threads. The outlining and the padding of the different rounded and
pointed scallops, as well as of other figures that occur in white
embroidery, are illustrated in figs. 181, 182, 183, 184, 185, 187, 189,
190 and 191.
BLANKET, OR BUTTON-HOLE STITCH (fig. 171).--Work from left to right;
run in a foundation line, hold down the working thread below the run
line with the right thumb; insert the needle above and bring it out
below the run line but above the working thread; tighten the loop thus
formed, without drawing up the stuff, and continue in this manner,
setting your stitches closely and regularly, side by side.
[Illustration: FIG. 171. BLANKET, OR BUTTON-HOLE STITCH.]
STRAIGHT STEM STITCH (fig. 172).--Work from left to right. The needle
must always be inserted above the run thread, and brought out underneath
it. In the case of a very delicate pattern, take up only just as much
stuff as the run thread covers.
[Illustration: FIG. 172. STRAIGHT STEM STITCH.]
SLOPING STEM STITCH (fig. 173).--Work without a run thread; insert the
needle from right to left in a slanting direction, under 1 or 2
horizontal threads, and 5 or 6 perpendicular ones; so that each stitch
reaches halfway back to the last.
[Illustration: FIG. 173. SLOPING STEM STITCH.]
This kind of stem stitch is chiefly used for the fine upstrokes of
letters and numbers, and for linen embroidery.
BACK-STITCHING (fig. 174).--Back-stitching, that is small, even
stitches set closely together, is done from right to left, along a
straight line, and is chiefly used for filling in the centres of
letters, leaves and flowers.
[Illustration: FIG. 174. BACK-STITCHING.]
CROSSED BACK-STITCH (figs. 175 and 176).--Used, generally speaking,
only for very transparent materials; it forms a close seam of
cross-stitch, on the wrong side, and two straight rows of back-stitching
on the right. To work, insert the needle as if for an ordinary
back-stitch, pass it under the stuff, sloping it a little towards the
second outline of the pattern, and draw it out almost in front of the
first stitch. After making a back-stitch, pass the needle up again under
the stuff and bring it out at the spot where the next stitch is to be.
[Illustration: FIG. 175. CROSSED BACK-STITCH. RIGHT SIDE.]
[Illustration: FIG. 176. CROSSED BACK-STITCH. WRONG SIDE.]
Fig. 176 shows the interlacing of the stitches on the wrong side, and
the way in which this stitch, when it is used for filling in centres,
can be worked on the right side.
SIMPLE KNOT STITCH (fig. 177). This consists of two back-stitches,
side by side, covering the same threads; it is chiefly used for filling
in leaves, embroidered on very thin materials, or in conjunction with
flat stitch.
[Illustration: FIG. 177. SIMPLE KNOT STITCH.]
TWISTED KNOT STITCH (fig. 178). To work hold the working thread down
with the thumb close to the spot where you first brought it out, twist
it twice round the needle, turn the needle round from left to right,
following the direction indicated by the arrow, pass it through the
fabric at the place which is marked by a dot, and draw it out at the
place where the next stitch is to be.
[Illustration: FIG. 178. TWISTED KNOT STITCH.]
POST STITCH (fig. 179).--Something like knot stitch and much used for
patterns, composed of small flowers and leaves, where it often takes the
place of raised satin stitch. The illustration represents five leaves
finished, and the sixth in process of being worked.
[Illustration: FIG. 179. POST STITCH.]
To work, bring the needle up from the back and twist the thread round it
as many times as the length of the stitch requires, hold the left thumb
on the species of curl thus formed, and passing the needle and thread
through it, insert it at the end of the leaf where it first came out,
and draw it out at the right place for the next stitch.
BUTTON-HOLE BARS (fig. 180).--When a pattern is ornamented with
open-work bars, begin by tracing the outside parallel lines. Then
button-hole the whole lower line and the upper one, till you come to the
place where the first bar is to be; then you carry your thread across
and bring up the needle from below through one of the loops, as, shown
in the figure; lay three threads in this manner, inserting your needle
the third time one loop further on. Then cover the three threads thickly
with button-holing.
[Illustration: FIG. 180. BUTTON-HOLE BARS.]
DIFFERENT KINDS OF SCALLOPS (figs. 181, 182, 183).--The outlining,
padding and button-holing of these scallops is executed in the manner
already described. Be careful to adapt the length of the stitches to the
shape and size of the scallops. If they are pointed (figs. 182, 183),
the stitches will have to be set very closely together on the inner
line, and a little play allowed them on the outer, to come exactly to
the point, which should be very sharply defined.
[Illustration: FIG. 181. ROUND, BUTTON-HOLED SCALLOPS.]
[Illustration: FIG. 182. LARGE, POINTED, BUTTON-HOLED SCALLOPS.]
[Illustration: FIG. 183. SMALL, POINTED, BUTTON-HOLED SCALLOPS.]
ROSE SCALLOPS (figs. 184 and 185).--These are, large button-holed
scallops with indented edges, in the one case, rounded at the top and
sharply pointed at the join; in the other, pointed at the top, and
joined at the bottom by a straight bar of button-holing.
[Illustration: FIG. 184. ROUNDED ROSE SCALLOPS.]
[Illustration: FIG. 185. POINTED ROSE SCALLOPS.]
EYELET HOLES (figs. 186, 187, 188).--Outline the eyelet holes very
carefully first by running a thread round them, then cut out the
enclosed stuff with a sharp pair of finely pointed scissors, and edge
the hole with plain overcasting stitches, worked from left to right.
[Illustration: FIG. 186. OVERCAST EYELET HOLES.]
When you have a long row of eyelet holes to make, outline the upper and
lower halves alternately, first on one side and then on the other, using
two threads, and then overcast them in the same way. The double crossing
of the working threads between the eyelet holes makes them much
stronger, than if each hole were finished off separately, and the thread
passed underneath from one to the other.
[Illustration: FIG. 187. BUTTON-HOLED SHADED EYELET HOLES.]
[Illustration: FIG. 188. SHADED EYELET HOLES HALF OVERCAST, HALF
BUTTON-HOLED.]
The lower halves of shaded eyelet holes, (see figs. 187 and 188), are
worked with very short stitches, and the upper halves with long ones;
they may be edged entirely, either with button-holing or overcasting, or
half with one and half with the other.
SIX LEAVES IN RAISED SATIN STITCH (fig. 189).--Raised satin stitch is
chiefly used for working flowers, leaves, petals, dots, initials and
monograms. After tracing the outline of the design, fill in the centres
with a padding of long, close stitches for which you can again take
Coton à repriser D.M.C[A] and then, beginning always at the point of the
leaf, see letter A, cover it with flat, perfectly even stitches, worked
from right-to-left. B illustrates a leaf, divided through the middle by
a line of overcasting; C, one with a corded vein; D, a divided leaf
worked in sloping satin stitch; E, a leaf, with a corded vein and framed
in sloping satin stitch; F, a leaf worked half in satin stitch, half in
back-stitch and straight stem stitch.
[Illustration: FIG. 189. SIX LEAVES IN RAISED SATIN STITCH.]
Leaves and flowers of all descriptions, can be executed in any of these
stitches, and in different combinations of the same.
SIX WAYS OF MAKING DOTS (fig. 190).--Dots, when they are well made,
are exceedingly effective in white embroidery, particularly if they are
worked in a variety of stitches. Dot A is worked in raised satin stitch;
B, in raised satin stitch, framed in back stitch; C, in raised satin
stitch, framed in twisted knot stitch; D is composed of several post
stitches of different lengths, set in a frame of stem stitches; E is
worked in back-stitch, and F consists of a small eyelet hole, with a
corded setting, which forms the centre.
[Illustration: FIG. 190. SIX WAYS OF MAKING DOTS.]
VENETIAN EMBROIDERY (fig. 191).--Scallops, worked in very high relief,
called Venetian embroidery, are an imitation on stuff of Venetian lace.
Real Venetian point is entirely needle-made; in the embroidered
imitations of it, the stuff takes the place of the needle-made lace
foundation. To make it more like the original however, the ground is
seldom left plain, but is covered with fancy stitches, such as are
represented in the illustration, or with one or other of the damask
stitches in figs. 146 to 170. The button-hole bars may be made with or
without picots. A full description of the latter will be found in the
chapters on net embroidery, and Irish lace. The space to be buttonholed,
must be well padded, for thereon depends the roundness of the
embroidery. For this purpose take 6 or 8 threads of Coton à repriser
D.M.C No. 25,[A] and fasten them down on to the pattern with loose
stitches, laying on extra threads, and cutting them gradually away,
according to the width the line is to be. The stuff underneath the
bars should only be cut away when the embroidery is quite finished.
[Illustration: FIG. 191. VENETIAN EMBROIDERY.]
RENAISSANCE EMBROIDERY (figs. 192 and 193).--This is the term applied,
more especially in France, to embroidery patterns, which are worked
entirely in button-holing, and connected by button-hole bars without
picots, as shewn in the two accompanying figures. The outside edge in
fig. 193, is embellished with picots, described in the chapters just
referred to.
[Illustration: FIG. 192. RENAISSANCE EMBROIDERY.]
[Illustration: FIG. 193. RENAISSANCE EMBROIDERY.]
RICHELIEU EMBROIDERY (fig. 194).--The name given to embroidery of a
similar kind to the former, but in which the connecting bars, instead of
being left plain as they are in the Renaissance embroidery, are
ornamented with picots.
[Illustration: FIG. 194. RICHELIEU EMBROIDERY.]
MADEIRA WORK (figs. 195, 196, 197).--This kind of embroidery, which
consists chiefly of eyelet holes, and is distinguished for the
excellence of its workmanship used to be known as English, but is now
generally called Madeira work, from the island where it originated. The
scallops in figs. 195 and 197, are bordered with shaded eyelet holes,
worked half in button-hole stitch, half in overcasting; the finely
scalloped edge, in fig. 196, is entirely button-holed. In working eyelet
holes, the material must always be turned in, up to the inside line, and
completely worked in, underneath the in order that no loose threads may
be visible on the wrong side.
[Illustration: FIG. 195. MADEIRA WORK.]
[Illustration: FIG. 196. MADEIRA WORK. MATERIALS: Coton Madeira D.M.C
No. 40, 50 or 60. (Special cotton for Madeira work)[A]]
[Illustration: FIG. 197. MADEIRA-WORK. MATERIALS: Coton Madeira D.M.C
No. 40, 50 or 60. (Special cotton for Madeira-work).]
SWISS EMBROIDERY FRAME (fig. 198).--Letters, monograms, coronets and
the like, require extreme care in the working, and can only be really
well done in a frame. The round Swiss frame, or tambour frame, is the
one most commonly used. It consists of two wooden hoops, fitting loosely
into each other; the inner one, fastened to a support with a wooden
screw let into the lower part of it, with which to fasten the frame to
the table. The outside hoop is loose.
Place the fabric to be embroidered over the smaller hoop, the pattern in
the middle, and press the other down over it so that it is tightly
stretched and fixed between the two hoops.
A leathern strap with holes and a buckle, sometimes takes the place of
the second hoop.
[Illustration: FIG. 198. SWISS EMBROIDERY FRAME.]
ORDINARY EMBROIDERY FRAME (fig. 199).--Tambour frames can only be used
for embroidering pocket-handkerchiefs and other small articles; all
larger work has to be done in an ordinary frame. Sew a piece of strong
stuff into the frame, stretch it as tightly and evenly as possible, and
cut out a square in the middle to the size of the pattern. Then tack
your work in underneath, straight to the thread, dividing it out
carefully with pins first, to ensure its being set in perfectly evenly.
Roll or fold up the rest of the stuff over the edges of the frame,
and secure it with a few stitches or pins, to keep it out of the way of
your hand as you work.
[Illustration: FIG. 199. ORDINARY EMBROIDERY FRAME.]
ALPHABETS FOR MONOGRAMS (figs. 200 to 205).--On account of the
difficulty of devising a good monogram for marking under-linen, we
subjoin two alphabets, by the aid of which our workers will be able to
compose their own.
The letters are of a good medium size, which can be magnified or reduced
according to the worker's own taste.
For any such modifications, we would again draw our reader's attention
to the directions given in the concluding chapter. The three first
plates represent large wide letters, intended to contain or encompass
the more elongated ones, represented in the fourth and fifth plates,
figs. 203 and 204.
The interlacing of the letters requires to be carefully done, and our
workers should study the following specimens, so as to learn the
stitches also, which are most suitable for this branch of embroidery.
[Illustration: FIG. 200. ALPHABETS FOR MONOGRAMS. Outside letters A to
H.]
[Illustration: FIG. 201. ALPHABETS FOR MONOGRAMS. Outside letters J to
Q.]
[Illustration: FIG. 202. ALPHABETS FOR MONOGRAMS. Outside letters R to
Y.]
[Illustration: FIG. 203. ALPHABETS FOR MONOGRAMS. Inside letters A to
L.]
[Illustration: FIG. 204. ALPHABETS FOR MONOGRAMS. Inside letters M to
X.]
[Illustration: FIG. 205. ALPHABETS FOR MONOGRAMS. Last inside and
outside letters.]
MONOGRAM COMPOSED OF LETTERS A AND D (fig. 206).--Here, letter A is
worked in flat satin stitch, in Bleu-Indigo 312, and set in stem stitch,
worked in Rouge-Turc 321. D as a contrast to A, is embroidered in
transverse bars, the left part in pale blue and white, the right in pale
blue and dark blue. The little ornaments may be worked according to
fancy, either in white, or in one of the given colours.
[Illustration: FIG. 206. MONOGRAM COMPOSED OF LETTERS A AND D DRAWN FROM
THE ALPHABETS OF MONOGRAMS. MATERIALS: Coton à broder D.M.C Nos. 100 to
150. COLOURS: Bleu-Indigo 334, Rouge-Turc 321 and white.[A]]
MONOGRAM COMPOSED OF LETTERS V AND S (fig. 207).--The flat satin
stitch in both letters is worked in white; the setting, is in red, in
short stem stitch, or if preferred, in knotted back stitch.
[Illustration: FIG. 207. MONOGRAM COMPOSED OF LETTERS V AND S DRAWN FROM
THE ALPHABETS OF MONOGRAMS. MATERIALS: Coton à broder D.M.C No. 120.
COLOURS: White and Rouge-Cardinal 305.[A]]
MONOGRAM COMPOSED OF LETTERS R AND C (fig. 208).--These are worked in
black and grey, for mourning; the way C is divided, admits of a variety
in the stitch; for instance, the back-stitches, in the illustration, may
be replaced by very small eyelet holes.
[Illustration: FIG. 208. MONOGRAM COMPOSED OF LETTERS R AND C DRAWN FROM
THE ALPHABETS OF MONOGRAMS. MATERIALS: Fil à dentelle D.M.C No. 150.
COLOURS: Gris-Cendre 318 and Noir grand Teint 310.]
MONOGRAM COMPOSED OF LETTERS G AND E (fig. 209).--The flat satin
stitching and back-stitching in E, and the stem-stitched edges of G are
worked in white Coton à broder D.M.C; the inside of G in ivory white
Coton surfin D.M.C.
[Illustration: FIG. 209. MONOGRAM COMPOSED OF LETTERS G AND E DRAWN FROM
THE ALPHABETS OF MONOGRAMS. MATERIALS: Coton à broder D.M.C No. 120
white and Coton surfin D.M.C No. 120, unbleached.]
BORDER IN GOBELIN STITCH (fig. 210).--Gobelin embroidery is merely
raised satin stitch, worked directly upon the pattern, without any
foundation, or padding. The effectiveness of this kind of embroidery,
which appears so complicated and is really so easy, and the many ways in
which it can be utilised, soon brought it into favour. It can be worked
on the article itself, or on stripes, laid on afterwards, with a
hem-stitch bordering. The original of fig. 210 was in blue and red;
Bleu Indigo 312 for the grounding, Rouge-Turc 321, for the setting in
stem-stitch. The herring-boning along the edges of the pattern, top and
bottom, is also in red.
[Illustration: FIG. 210. BORDER IN GOBELIN STITCH. MATERIALS: Coton à
broder D.M.C No. 35 in two different colours such as: Bleu-Indigo 312
and Rouge-Cardinal 304, Rouge-Grenat 358 and 309 or, Gris-Tilleul 393
and Rouge-Cardinal 305.[A]]
Should a different selection of colours be made, it is important to
remember that in all cases a sharp contrast is desirable.
ALPHABET AND NUMERALS, LEFT BLANK, AND OUTLINED BY THE GROUNDING,
WORKED IN GOBELIN STITCH (figs. 211 to 215).
[Illustration: FIG. 211. ALPHABET LEFT BLANK AND OUTLINED BY THE
GROUNDING. Letters A to N.]
[Illustration: FIG. 212. ALPHABET LEFT BLANK AND OUTLINED BY THE
GROUNDING. Letters O to Z.]
[Illustration: FIG. 213. LETTER O, FROM THE ALPHABET GIVEN IN FIGS. 211
AND 212.]
[Illustration: FIG. 214. NUMERALS LEFT BLANK AND OUTLINED BY THE
GROUNDING.]
The border worked in Gobelin stitch, illustrated in fig. 210, suggested
to us the idea of an alphabet and numerals, to be executed in a similar
style, left blank, that is to say, and outlined by a grounding in
Gobelin stitch, which are better suited to embroideries of the kind than
those generally used. Our limited space prevents us from giving all the
letters in the diagonal position they are intended to occupy on the
article itself. O and W only, are represented in the right position. No
difficulty will be found in copying the other letters, in giving them
the proper direction.
[Illustration: FIG. 215. LETTER W, FROM THE ALPHABET GIVEN IN FIG. 211
AND 212.]
In order to economize room, J and H are represented in one square, but
they are easily distinguishable from each other.
Fig. 214 represents the numerals, executed in the same way. We should
like to draw our readers attention to a few other ways in which letters
and numerals may be outlined by the back-ground; for example, the solid
parts can be worked either in plain or twisted knot stitch (figs. 177
and 178); in very fine chain stitch; in old German knot or bead stitch
(fig. 873), or even in piqué embroidery (fig. 877).
BORDER OUTLINED BY GROUNDING, WORKED IN GOBELIN AND STEM STITCH (fig.
216). The grounding of this pattern is worked on stiff white linen, and
entirely in Rouge-Turc 321, and the outlining in Noir grand Teint 310.
The same pattern can equally well be worked on gauzes and other
transparent stuffs, but with Coton à repriser, instead of Coton à broder
D.M.C, for the solid parts. Two shades of Rouge-Grenat, one dark and one
very light, may be taken instead, or two of Jaune-Rouille, or of
Violet-Mauve, employing always the lighter shade for the grounding and
the darker for the setting.
[Illustration: FIG. 216. BORDER, OUTLINED BY THE GROUNDING WORKED IN
GOBELIN AND STEM STITCH. First part.]
[Illustration: FIG. 216. Second part. MATERIALS: Coton à broder D.M.C
No. 50.--COLOURS: Rouge-Turc 321 and Noir grand Teint 310.[A]]
Be careful, in the grounding, not to make the red stitches near the
edge, longer than they are represented in the illustration and to set
the black stem stitches as close as possible to the grounding.
The pattern, which could only be reproduced in the original size, had to
be divided in two, to fit the page. In copying it, join the A and B of
the first part to the A and B of the second; the same in fig. 217, each
time the pattern is repeated, the flowers are to droop from the + as
seen from the position of the buds in the first part, at the beginning
of the drawing.
FLOWER GARLAND IN DIFFERENT KINDS OF STITCHES (figs. 217 and
218).--Most of the stitches, described at the beginning of this chapter,
will be found in this graceful garland, in the execution of which a
considerable variety of colours can be introduced. The rose-buds may be
worked in two shades of Vert-Pistache and of Rouge-Grenat, in the
stitches described in figs. 173, 177, 189 A; the forget-me-nots, in two
or even three shades of Bleu-Indigo, in raised satin stitch and knotted
stitch; the slender green leaves in Vert-de-gris, or Gris-Tilleul, the
stamens in Jaune-Citron, and the stalks of the roses in Brun-Acajou.
[Illustration: FIG. 217. FLOWER-GARLAND IN DIFFERENT KINDS OF STITCHES.
First part.]
[Illustration: FIG. 217. Second part. MATERIALS: Coton à broder D.M.C
No. 40. COLOURS: Rouge-Grenat 326 and 335, Bleu-Indigo 312 and 334,
Vert-Pistache 319 and 320, Vert-de-gris 474 and 475, Brun-Acajou 301,
Jaune-citron 446.]
[Illustration: FIG. 218. SHOWING THE WORKING OF THE OUTSIDE STITCHES IN
FIG. 217.]
The border that completes this charming pattern, consists of four rows
of button holing, worked in four colours. The first row in our
illustration is worked in pale pink, followed by three shades of green,
the palest of which is used for the second row of stitches.
When these rows are worked upon a satine or cambric foundation, it is
advisable to begin by making a small drawing, in which the height of the
stitches and the distance between them is accurately marked out, then
prick the pattern through and pounce it upon the material beneath.
When they are worked on a material, the threads of which can be counted
no such precaution is necessary.
INSERTION IN GOBELIN AND STEM STITCH (fig. 219).--Owing to the
shortness of the stitches, this pattern is easier to work than the
foregoing ones. The little flowers are embroidered alternately in dark
and light red; the setting varies to correspond, the light red flower
being set in dark red, and vice versa. The interior of the leaves is in
light green and the setting, as well as the connecting bars, in dark
green.
[Illustration: FIG. 219. INSERTION IN GOBELIN AND STEM STITCH.
MATERIALS: Coton à broder D.M.C No. 35--COLOURS: Rouge-Cardinal 347 and
Rouge-Géranium 352 with Gris-Tilleul 392 and 331, or Bleu-Indigo 312 and
334 with Vert-Mousse 469 and 471, or Violet-Mauve 375 and 376 with
Jaune-Rouille 364 365.[A]]
STRIPES OF EMBROIDERY WITH LACE INSERTION BETWEEN (fig. 220).--We
conclude this chapter, by showing how stripes of embroidery can be used
alone, or in conjunction, either with bands of open-work, or lace,
crochet, or net insertion. Such combinations are useful for ornamenting
aprons, table-cloths, curtains etc., every description in short of
household linen and of children's garments. One great advantage,
moreover, which stripes of this kind, have over larger pieces of
embroidery is that they require neither frame nor pillow, nor wearisome
counting of stitches, but can be worked in the hand, at all times and
places.
[Illustration: FIG. 220. STRIPES OF EMBROIDERY WITH INSERTION BETWEEN.]
FOOTNOTES:
[A] See at the end of the concluding chapter, the table of numbers and
sizes and the list of colours of the D.M.C threads and cottons.
[Illustration: STRIPE OF GOLD EMBROIDERY IN GOLD THREAD, PURL, AND
FLATTENED GOLD WIRE.]
Flat stitch and Gold embroidery.
The terms, flat stitch and gold embroidery, suggest as a rule,
needle-work upon rich materials, such as velvet, brocade, plush and the
like.
Nevertheless, a great deal of beautiful embroidery is to be met with, in
silk and gold thread upon quite common stuffs; Persian and Moorish
embroidery for instance, both remarkable for their delicacy and
minuteness, and executed upon ordinary linen, or cotton fabrics.
As a fact, the material is quite a secondary matter; almost any will do
equally well as a foundation, for the stitches described in these pages.
Flat stitch, and some of the other stitches used in gold embroidery, can
be worked with any kind of thread, but best of all with the D.M.C
cottons.
FLAT STITCH EMBROIDERY.--Decorative designs, and conventional flowers,
are the most suitable for flat stitch embroidery; a faithful
representation of natural flowers should not be attempted, unless it be
so well executed, as to produce the effect of a painting and thus
possess real artistic merit.
ENCROACHING FLAT STITCH (fig. 221).--Small delicate flowers, leaves,
and arabesques, should in preference, be worked either in straight flat
stitch (figs. 189 and 190) or in encroaching flat stitch. The stitches
should all be of equal length, the length to be determined by the
quality of the thread; a fine thread necessitating short, and a coarse
one, long stitches. The stitches should run, one into the other, as
shown in the illustration. They are worked in rows, those of the second
row encroaching on those of the first, and fitting into one another.
[Illustration: FIG. 221. ENCROACHING SATIN STITCH.]
Work your flowers and leaves from the point, never from the calyx or
stalk. If they are to be shaded, begin by choosing the right shade for
the outside edge, varying the depth according to the light in which the
object is supposed to be placed. The stitches should always follow the
direction of the drawing.
ORIENTAL STITCH (figs. 222, 223, 224).--The three following stitches,
which we have grouped under one heading, are known also, under the name
of Renaissance or Arabic stitches. We have used the term Oriental,
because they are to be met with in almost all Oriental needlework and
probably derive their origin from Asia, whose inhabitants have, at all
times, been renowned for the beauty of their embroideries.
[Illustration: FIG. 222. ORIENTAL STITCH.]
[Illustration: FIG. 223. ORIENTAL STITCH.]
These kind of stitches are only suitable for large, bold designs. Draw
in the vertical threads first; in working with a soft, silky material,
to economise thread, and prevent the embroidery from becoming too heavy,
you can begin your second stitch close to where the first ended.
[Illustration: FIG. 224. ORIENTAL STITCH.]
But if the thread be one that is liable to twist, take it back
underneath the stuff and begin your next stitch in a line with the
first, so that all the stitches of the first layer, which form the
grounding, are carried from the top to the bottom. The same directions
apply to figs. 223, 224 and 226.
When you have laid your vertical threads, stretch threads horizontally
across, and fasten them down with isolated stitches, set six vertical
threads apart. The position of these fastening stitches on the
transverse threads must alternate in each row, as indicated in fig. 222.
For fig. 223, make a similar grounding to the one above described,
laying the horizontal threads a little closer together, and making the
fastening stitches over two threads.
In fig. 224, the second threads are carried diagonally across the
foundation-threads, and the fastening stitches are given a similar
direction.
For these stitches, use either one material only, a fleecy thread like
Coton à repriser D.M.C for instance, or else two, such as Coton à
repriser D.M.C for the grounding, and a material with a strong twist
like Cordonnet 6 fils D.M.C or Fil à pointer D.M.C for the stem stitch.
PLAITED STITCH (fig. 225).--When the vertical stitches are laid, a
kind of plait is formed in the following way. Pass the thread three
times, alternately under and over three foundation threads. To do this
very accurately, you must take the thread back, underneath, to its
starting-point; and consequently, always make your stitch from right to
left.
[Illustration: FIG. 225. PLAITED STITCH.]
If you have chosen a washing material, and D.M.C cottons to work with,
use one colour of cotton for the foundation, and Chiné d'or D.M.C No.
30, for the plaited stitch.
MOSAIC STITCH (fig. 226).--In old embroideries we often find this
stitch, employed as a substitute for plush or other costly stuffs,
appliquéd on to the foundation. It is executed in the same manner as the
four preceding stitches, but can only be done in thick twist, such as
Cordonnet 6 fils D.M.C or Ganse turque D.M.C.
[Illustration: FIG. 226. MOSAIC STITCH.]
Each stitch should be made separately, and must pass underneath the
foundation, so that the threads which form the pattern are not flat, as
they are in the preceding examples, but slightly rounded.
BORDER IN PERSIAN STITCH (fig. 227).--This stitch, of Persian origin,
resembles the one represented in fig. 175. Instead of bringing the
needle out, however, as indicated in fig. 176, take it back as you see
in the illustration, to the space between the outlines of the drawing,
and behind the thread that forms the next stitch. Before filling in the
pattern, outline it with short stem stitches, or a fine cord, laid on,
and secured with invisible stitches.
[Illustration: FIG. 227. BORDER IN PERSIAN STITCH. MATERIALS: Cordonnet
6 fils D.M.C No. 14, 15, 20 or 25. COLOURS: Noir grand Teint 310,
Vert-Mousse 469 and 471, Rouge-Cardinal 346, Jaune-vieil-Or 680,
Violet-Mauve 315 and 316.]
This graceful design which can be utilised in various ways is formed of
leaves of 7 lobes, worked alternately in dark and light green; of
flowers of 3 petals, worked in red and the centres in yellow, and of
small leaves in violet. The setting, throughout, is worked either in
black or in dark brown.
STRIPE WORKED IN FLAT STITCH (fig. 228).--This pattern, simple as it
is, will be found both useful and effective for the trimming of all
kinds of articles of dress. The bottom edge should be finished off with
rounded scallops or toothed vandykes worked in button-hole stitch. The
flowers in flat stitch, are worked alternately, in Rouge-Géranium 351
and 352, and the leaves alternately, in Vert-de-gris 474 and 475; the
centres of the flowers are worked in knot stitch, in Jaune-Rouille 308.
[Illustration: FIG. 228. STRIPE WORKED IN FLAT STITCH.
MATERIALS--According to the stuff: Fil à dentelle D.M.C, Cordonnet 6
fils D.M.C or Coton à repriser D.M.C[A]
COLOURS--For the flowers: Rouge-Géranium 351 and 352.--For the knot
stitch: Jaune-Rouille 308.--For the foliage: Vert-de-gris 474 and
475.[A]]
BOUQUET IN STRAIGHT AND ENCROACHING FLAT STITCH (fig. 229). As we have
already observed, it is by no means easy to arrange the colours in an
embroidery of this kind, so as to obtain a really artistic effect.
Whether the design be a conventional one or not, the great point is to
put in the lights and shadows at the right place. If you want to make a
faithful copy of a natural flower, take the flower itself, or a coloured
botanical drawing of it, and if possible, a good black and white drawing
of the same, match the colours in 6 or 7 shades, by the flower itself,
keeping them all rather paler in tone, and take the black and white
drawing as a guide for the lights and shadows. The colours for the
leaves and petals, which should always be worked from the outside,
should be chosen with a view to their blending well together. The
stamens and the centres of the flowers should be left to the last, but
the veins and ribs of the leaves, should always be put in before the
grounding.
[Illustration: FIG. 229. BOUQUET IN STRAIGHT AND ENCROACHING FLAT
STITCH. MATERIALS: Coton à repriser D.M.C No. 50. COLOURS--For the
forget-me-nots: Bleu-Indigo 312, 322 and 334.--For the other flowers:
Jaune-Rouille 365 and 366, Violet-Mauve 376, 316 and 377, Vert-Pistache
369.--For the foliage: Vert-de-Gris 474, Vert-Mousse 468, 469, 471 and
472.--For the stalks: Brun-Havane 455 and 457.[A]]
For embroideries of this kind, suitable materials must be selected; the
more delicate and minute the design, and the more varied the colouring,
the softer and finer should be the quality of the material employed.
Specially to be recommended, as adapted to every form of stitch and as
being each of them capable of being subdivided, are Filoselle,
Marseille, open Chinese silk and Coton à repriser D.M.C.[A].
FLOWERS EMBROIDERED IN THE CHINESE MANNER (fig. 230).--All Chinese
embroidery displays undoubted originality and wonderful skill and
judgment in the choice of material and colour. It excels particularly,
in the representation of figures, flowers, and animals, but differs from
European work in this, that instead of using flat stitch and making the
colours blend together as we do, the Chinese put them, side by side,
without intermediate tones, or they sometimes work the whole pattern in
knot stitch. The little knots, formed by this stitch are generally set
in gold thread.
[Illustration: FIG. 230. FLOWERS EMBROIDERED IN THE CHINESE MANNER.]
Often too, instead of combining a number of colours, as we do, the
Chinese fill in the whole leaf with long stitches and upon this
foundation, draw the veins in a different stitch and colour. Even the
flowers, they embroider in the same way, in very fine thread, filling
in the whole ground first, with stitches set very closely together and
marking in the seed vessels afterwards, by very diminutive knots, wide
apart.
CHINESE ENCROACHING FLAT STITCH (fig. 231).--Another easy kind of
embroidery, common in China, is done in encroaching flat stitch. The
branch represented in our drawing, taken from a large design, is
executed in three shades of yellow, resembling those of the
Jaune-Rouille series on the D.M.C colour card.[A]
[Illustration: FIG. 231. CHINESE ENCROACHING FLAT STITCH.
MATERIALS: Cordonnet 6 fils D.M.C Nos. 20 to 50 or Chiné d'or D.M.C.
COLOURS--For the cotton: Jaune-Rouille 363, 308, 366.--For Chiné d'or:
Red and gold, blue and gold, green and gold.[A]]
The stitches of the different rows encroach upon one another, as the
working detail shows, and the three shades alternate in regular
succession. Flowers, butterflies and birds are represented in Chinese
embroidery, executed in this manner. It is a style, that is adapted to
stuffs of all kinds, washing materials as well as others, and can be
worked in the hand and with any of the D.M.C threads and cottons.[A]
RAISED EMBROIDERY (figs. 232 and 233).--Raised embroidery worked in
colours, must be stuffed or padded first, like the white embroidery in
fig. 191. If you outline your design with a cord, secure it on the right
side with invisible stitches, untwisting the cord slightly as you insert
your needle and thread, that the stitch may be hidden between the
strands. Use Coton à repriser D.M.C No. 25, for the padding. These
cottons are to be had in all the colours, indicated in the D.M.C colour
card, and are the most suitable for the kind of work.
[Illustration: FIG. 232. RAISED EMBROIDERY. PREPARATORY WORK.]
[Illustration: FIG. 233. RAISED EMBROIDERY. WORK COMPLETED.]
Use Coton à broder D.M.C for the transverse stitches and over the smooth
surface which is thus formed, work close lines of satin stitch in silk
or cotton; the effect produced, will bear more resemblance to appliqué
work than to embroidery. The centres of the flowers are filled in with
knot stitches, which are either set directly on the stuff or on an
embroidered ground.
EMBROIDERY IN THE TURKISH STYLE (figs. 234 and 235).--This again is a
style of embroidery different from any we are accustomed to. The solid
raised parts are first padded with common coarse cotton and then worked
over with gold, silver, or silk thread.
Contrary to what is noticeable in the real Turkish embroidery, the
preparatory work here is very carefully done, with several threads of
Coton à repriser D.M.C used as one. A rope of five threads is laid down,
and carried from right to left and from left to right, across the width
of the pattern. After laying it across to the right, as explained in
fig. 234, bring the needle out a little beyond the space occupied by the
threads, insert it behind them and passing it under the stuff, draw it
out at the spot indicated by the arrow. The stitch that secures the
threads, should be sufficiently long to give them a little play, so that
they may lie perfectly parallel, side by side, over the whole width of
the pattern.
This kind of work can be done on wollen or cotton materials, and
generally speaking, with D.M.C cottons, and gold thread shot with colour
(Chiné d'or D.M.C.)
Very pretty effects can be obtained, by a combination of three shades of
Rouge-Cardinal 347, 346 and 304, with Chiné d'or gold and dark blue or
with Chiné d'or, gold and light blue.[A]
This kind of embroidery may be regarded as the transition from satin
stitch to gold embroidery.
[Illustration: FIG. 234. EMBROIDERY IN THE TURKISH STYLE. PREPARATORY
WORK.]
[Illustration: FIG. 235. EMBROIDERY IN THE TURKISH STYLE. WORK
COMPLETED.]
GOLD EMBROIDERY.--Up to the present time, dating from the end of the
eighteenth century, gold embroidery has been almost exclusively confined
to those who made it a profession; amateurs have seldom attempted what,
it was commonly supposed, required an apprenticeship of nine years to
attain any proficiency in.
But now, when it is the fashion to decorate every kind of fancy article,
whether of leather, plush, or velvet, with monograms and ingenious
devices of all descriptions, the art of gold embroidery has revived and
is being taken up and practised with success, even by those to whom
needlework is nothing more than an agreeable recreation.
We trust that the following directions and illustrations will enable our
readers to dispense with the five years training, which even now,
experts in the art consider necessary.
IMPLEMENTS AND MATERIALS.--The first and needful requisites for gold
embroidery, are a strong frame, a spindle, two pressers, one flat and
the other convex, a curved knife, a pricker or stiletto, and a tray, to
contain the materials.
EMBROIDERY FRAME (fig. 236).--The frame, represented here, is only
suitable for small pieces of embroidery, for larger ones, which have to
be done piece by piece, round bars on which to roll up the stuff, are
desirable, as sharp wooden edges are so apt to mark the stuff.
[Illustration: FIG. 236. EMBROIDERY FRAME FOR GOLD EMBROIDERY.]
Every gold embroidery, on whatever material it may be executed, requires
a stout foundation, which has to be sewn into the frame, in doing which,
hold the webbing loosely, almost in folds, and stretch the stuff very
tightly. Sew on a stout cord to the edges of the foundation, which are
nearest the stretchers, setting the stitches, 3 or 4 c/m. apart. Then
put the frame together and stretch the material laterally to its fullest
extent, by passing a piece of twine, in and out through the cord at the
edge and over the stretchers. Draw up the bracing until the foundation
is strained evenly and tightly. Upon this firm foundation lay the stuff
which you are going to embroider, and hem or herring-bone it down,
taking care to keep it perfectly even with the thread of the foundation
and, if possible, more tightly stretched to prevent it from being
wrinkled or puckered when you come to take it off the backing. For
directions how to transfer the pattern to your stuff, and prepare the
paste with which the embroidery has to be stiffened before it is taken
out of the frame, see the concluding chapter in the book.
THE SPINDLE (fig. 237).--The spindle to wind the gold thread upon,
should be 20 c/m. long and made of hard wood. Cover the round stalk and
part of the prongs with a double thread of Coton à broder D.M.C No. 16,
or pale yellow Cordonnet D.M.C No. 25, and terminate this covering with
a loop, to which you fasten the gold thread that you wind round the
stalk.
[Illustration: FIG. 237. THE SPINDLE.]
THE PRESSERS (figs. 238 and 239).--These, so called 'pressers', are
small rectangular boards with a handle in the middle. The convex one,
fig. 238, should be 15 c/m. long by 9 broad; the other, fig. 239, which
is quite flat, should be 32 c/m. by 20.
[Illustration: FIG. 238. CONVEX PRESSER, FOR PRESSING THE STUFF ON THE
WRONG SIDE.]
[Illustration: FIG. 239. FLAT PRESSER FOR LAYING ON THE PATTERN.]
Having cut out your pattern in cartridge paper, lay it down, on the
wrong side, upon a board thinly spread with embroidery paste. Let it get
thoroughly impregnated with the paste and then transfer it carefully to
its proper place on the stuff; press it closely down with the large
presser, and with the little convex one rub the stuff firmly, from
beneath, to make it adhere closely to the pasted pattern; small, pointed
leaves and flowers will be found to need sewing down besides, as you
will observe in fig. 242, where each point is secured by stitches. The
embroidery should not be begun until the paste is perfectly dry, and the
pattern adheres firmly to the stuff.
THE KNIFE (fig. 240).--Most gold embroideries require a foundation of
stout cartridge paper, and, in the case of very delicate designs, the
paper should further be covered with kid, pasted upon it.
[Illustration: FIG. 2
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment